Mazda RX-8 Manual page 1931

4. Verify that continuity at terminal F is as indicated in the Terminal Voltage Table (Reference).
If there is any malfunction, inspect the parts under "Inspection item(s)".
•
If the system does not work properly even though the parts or related wiring harnesses do
not have any malfunction, replace the flasher control module.
Terminal Voltage Table (Reference)
Signal
Terminal
name to
Power
A
supply 15 A fuse
Flasher
control
D
module (LH)
output
F GND
ground
Flasher
control
G
module (RH)
output
H Hazard
warning warning
Connected
Measured condition
HAZARD
Under any condition
Turn light
switch (LH) is
on.
Turn light
Hazard
warning
switch is on.
Except above
Under any condition:
Body
Inspect for continuity to
ground.
Turn light
switch (RH) is
on.
Turn light
Hazard
warning
switch is on.
Except above
Hazard warning switch is
Hazard
on.
Voltage
(V)/Continuity
B+
Turn Alternates
light (LH) between 1.0 or less
flashes. and B+
1.0 or less
Continuity
detected
Turn Alternates
light (RH) between 1.0 or less
flashes. and B+
1.0 or less
1.0 or less
Inspection item(s)
HAZARD 15 A
•
fuse
Related wiring
•
harnesses
Turn light (LH)
•
Related wiring
•
harnesses
GND
•
Turn light (RH)
•
Related wiring
•
harnesses
(w) RX-8 Body
Page 213