Mazda RX-8 Manual page 2305

2. Connect the SST (Adapter harness) to the pre-tensioner seat belt as shown in the figure.
3. Put the pre-tensioner seat belt inside the tire and secure it to the tire by wrapping a wire (cross section
2 2
1.25 mm {0.002 in
4. Stack the tire with the pre-tensioner seat belt on top of two tires without wheels. Stack a tire without a
wheel on top of the tire with the pre-tensioner seat belt, and then stack another tire with a wheel on the
very top.
5. Secure the tires with wire.
} or more ) through the tire and the bolt installation holes at least 4 times .
(w) RX-8 Safety
Page 144