11. Turn the adjusting screws to adjust the headlight so that the elbow point is in the shaded area shown in
the figure.
HEADLIGHT BULB REMOVAL/INSTALLATION
Low-beam
Halogen type
1. Disconnect the negative battery cable.
2. Remove the fasteners, then slightly bend back the mudguard.
3. Disconnect the connector.
CAUTION:
A halogen bulb generates extremely high heat when it is illuminated. If the surface of the bulb is
•
soiled, excessive heat will build up and the life of the bulb will be shortened. When replacing the
bulb, hold the metal flange, not the glass.
(w)
RX-8 Body
Page 200