Mazda RX-8 Manual page 1465

The DSC HU/CM hydraulic system is not significantly abnormal (including DSC
HU/CM).
The DSC HU/CM internal electrical parts (solenoid, motor and other parts) are normal.
The DSC unit and DSC HU/CM output system wiring harnesses (solenoid valve, relay
system) are normal.
However, the following items cannot be verified.
•
Malfunction with intermittent occurrence of the above items
Malfunction of DSC HU/CM input system wiring harnesses and parts
Extremely small leaks in the DSC HU/CM internal hydraulic system
DSC CONFIGURATION
1. Turn the ignition switch off.
2. Connect the WDS or equivalent to the DLC-2.
3. Input vehicle information following the directions on the screen of the WDS or equivalent.
4. Select "Module programming" from the WDS or equivalent menu.
5. Select "Programmable Module Installation".
6. Select "ABS/TCS".
7. Clear DTCs using the WDS or equivalent, then verify that there is no DTC present.
(w) RX8 - Brakes
Page 51