DTC C1295, C1307, C1937, C1938, C1956 [DYNAMIC STABILITY CONTROL]
DTC
C1295, C1307, C1937, C1938, C1956
DETECTION
CONDITION
POSSIBLE CAUSE
C1295
•
The steering angle sensor detects an internal abnormality.
C1307
•
The steering angle sensor detects an abnormality in the signal.
C1937
•
The difference between the steering angle calculated by each sensor and
the steering angle from the steering angle sensor exceeds specification.
C1938
•
The difference between the steering angle previously received and the
steering angle received at this time is not within specification.
The signal from the steering angle sensor remains unchanged when the
steering angle is turned to the right and left.
C1956
•
There is no signal received from the steering angle sensor.
Improper installation or positioning of the steering angle sensor
•
Steering angle sensor malfunction
•
Poor connection at connectors (female terminal)
•
Steering angle sensor
(w)
RX8 - Brakes
Page 124