6. Install in the reverse order of removal.
POWER WINDOW SUBSWITCH INSPECTION
1. Verify continuity as indicated in the table.
If not as indicated in the table, replace the power window subswitch.
•
2. Connect battery positive voltage to terminal E and ground to the terminal A. Verify that continuity
exists.
If not as specified, replace the power window subswitch.
•
3. Connect battery positive voltage to terminal E and ground to the terminal B. Verify that continuity
exists.
If not as specified, replace the power window subswitch.
•
(w)
RX-8 Body
Page 100