DTC B2477
DTC B2477
Configuration error
WARNING:
•
DETECTION
CONDITION
•
POSSIBLE
•
CAUSE
•
Diagnostic procedure
STEP INSPECTION
INSPECT SAS CONTROL MODULE
Using the WDS or equivalent, perform
•
1
SAS control module configuration.
Is DTC B2477 indicated?
•
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions may
cause injury due to an operating error, or damage the system. When performing an
inspection, always follow the inspection procedure.
SAS control module configuration has not been performed correctly.
SAS control module configuration error
SAS control module malfunction
ACTION
[Present malfunction diagnosis]
Replace the SAS control module.
•
(See SAS CONTROL MODULE
Yes
REMOVAL/INSTALLATION .)
[Past malfunction diagnosis]
DTC troubleshooting completed.
•
No DTC troubleshooting completed.
(w)
RX-8 Safety
Page 85