Mazda RX-8 Manual page 2255

Diagnostic procedure
STEP INSPECTION
INSPECT SEAT TRACK POSITION SENSOR
CIRCUIT
Using the WDS or equivalent, verify the following
•
PID/DATA monitor.
1
(See PID/DATA MONITOR TABLE .)
TRAK_SW
Is the seat track position sensor circuit normal?
•
2 INSPECT WIRING HARNESS BETWEEN SEAT
TRACK POSITION SENSOR AND SAS CONTROL
ACTION
[Present malfunction
diagnosis]
Replace the SAS control
•
module.
(See SAS CONTROL
MODULE
Yes
REMOVAL/INSTALLATIO
N )
[Past malfunction
diagnosis]
DTC troubleshooting
•
completed.
No Go to next step.
Replace the seat track position
Yes
sensor, then go to next step.
(w) RX-8 Safety
Page 94