OUTER MIRROR
POWER OUTER MIRROR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
4. Disconnect the power outer mirror connector.
5. Remove the screws.
6. Push the power outer mirror against the vehicle and detach the tab while lifting the mirror up to remove.
7. Install in the reverse order of removal.
POWER OUTER MIRROR ASSEMBLY/DISASSEMBLY
1. Disassemble in the order indicated in the table.
Outer mirror glass
1
(See Outer Mirror Glass Disassembly Note )
(See Outer Mirror Glass Assembly Note )
2 Connector (vehicles with heated outer mirrors)
2. Assemble in the reverse order of disassembly.
(w)
RX-8 Body
Page 105