Inspect the VSS.
•
(See VEHICLE SPEED SENSOR (VSS)
INSPECTION .)
Is the VSS normal?
•
VERIFY TROUBLESHOOTING OF DTC P0720
COMPLETED
Make sure to reconnect all disconnected
•
connectors.
Clear the DTC from the TCM memory using
•
10
the WDS or equivalent.
Drive the vehicle with vehicle speed of 5
•
km/h {3 mph} or less and turbine speed of
2,000 rpm or more for 3.5 s or more
Is the same DTC present?
•
VERIFY AFTER REPAIR PROCEDURE
Perform the "After Repair Procedure".
•
11
(See AFTER REPAIR PROCEDURE .)
Are any DTCs present?
•
Replace the VSS, then go to the next step.
No
(See VEHICLE SPEED SENSOR (VSS)
REMOVAL/INSTALLATION .)
Replace the TCM, then go to the next step.
Yes
(See TCM REMOVAL/INSTALLATION .)
No Go to the next step.
Go to the applicable DTC inspection.
Yes
(See DTC TABLE .)
No DTC troubleshooting completed.
(w)
RX-8 Transmission (Manual & Auto)
Page 164