Make sure to reconnect all disconnected
•
connectors.
Clear the DTC from the TCM memory
•
using the WDS or equivalent.
Start the engine.
•
Warm up AT.
•
Drive the vehicle in D range and make
•
sure that the gears shift smoothly from
1GR to 4GR.
Is the same DTC present?
•
VERIFY AFTER REPAIR PROCEDURE
Perform the "After Repair Procedure".
•
6
(See AFTER REPAIR PROCEDURE .)
Are any DTCs present?
•
No Go to the next step.
Go to the applicable DTC inspection.
Yes
(See DTC TABLE .)
No DTC troubleshooting completed.
(w)
RX-8 Transmission (Manual & Auto)
Page 226