NO.30 GEAR POSITION INDICATOR LIGHT ILLUMINATES IN D RANGE OR P, N, R
POSITIONS
30
Gear position indicator light illuminates when in D range or P, N, R positions
DESCRIPTION
POSSIBLE
NOTE:
CAUSE
Diagnostic procedure
STEP INSPECTION
Inspect the voltage at TCM terminal 1E.
1
(See TCM INSPECTION .)
Is the voltage normal?
Verify the test results.
If normal, return to the diagnostic index to service any additional symptoms.
•
If the malfunction remains, inspect the related Service Bulletins and/or On-line Repair
•
Information and perform repair or diagnosis.
2
If the vehicle is repaired, troubleshooting completed.
If the vehicle is not repaired or additional diagnostic information is not available, replace
the TCM.
(See TCM REMOVAL/INSTALLATION .)
Gear position indicator light in instrument cluster illuminates in D range or P, N, R
•
positions with ignition switch at ON.
M range switch or related wiring harness malfunction
•
Before following the troubleshooting steps, make sure that the Automatic
•
Transmission On-Board Diagnostic and Automatic Transmission Basic Inspection
are conducted. (See BASIC INSPECTION .)
ACTION
Yes
Inspect the instrument cluster.
No
Repair or replace any malfunctioning parts.
(w)
RX-8 Transmission (Manual & Auto)
Page 123