Mazda RX-8 Manual page 1214

Make sure to reconnect all disconnected
•
connectors.
Clear the DTC from the TCM memory
•
using the WDS or equivalent.
Start the engine.
•
Warm up AT.
•
Drive the vehicle under the following
•
conditions for 10 s or more .
Vehicle speed (VSS PID):
Within 10    87 km/h {6    54
mph}
Gear position: 4GR
TR switch position: D range
TCC solenoid valve: ON
Is the same DTC present?
•
VERIFY AFTER REPAIR PROCEDURE
Perform the "After Repair Procedure".
•
10
(See AFTER REPAIR PROCEDURE .)
Are any DTCs present?
•
No Go to the next step.
Go to the applicable DTC inspection.
Yes
(See DTC TABLE .)
No DTC troubleshooting completed.
(w) RX-8 Transmission (Manual & Auto)
Page 189