Mazda RX-8 Manual page 1183

Diagnostic procedure
STEP INSPECTION
VERIFY FREEZE FRAME DATA HAS BEEN
RECORDED
1
Has FREEZE FRAME DATA been
•
recorded?
VERIFY RELATED REPAIR INFORMATION
AVAILABILITY
2 Verify related Service Bulletins and/or on-
•
line repair information availability.
Is any related repair information available?
•
INSPECT TURBINE SENSOR CONNECTOR
FOR POOR CONNECTION
Turn the ignition switch to the LOCK
•
position.
3
Disconnect the turbine sensor connector.
•
Inspect for poor connection (such as
•
damaged/pulled-out pins, corrosion).
Are the connector and terminals normal?
•
4
ACTION
Yes Go to the next step.
Record the FREEZE FRAME DATA on
No
the repair order, then go to the next step.
Perform repair or diagnosis according to the
available repair information.
Yes
If the vehicle is not repaired, go to
•
the next step.
No Go to the next step.
Yes Go to the next step.
Repair or replace the connector and/or
No
terminal, then go to Step 10.
Yes Go to the next step.
(w) RX-8 Transmission (Manual & Auto)
Page 158