DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Appendix C - Trap Entries
The following table lists all possible trap log entries and their corresponding meanings that will appear in the Switch.
Authentication Fail
Trap Name
authenticationFailure
DDM
Trap Name
dDdmAlarmTrap
dDdmWarningTrap
External Alarm
Trap Name
dExternalAlarmStatusChg
LACP
Trap Name
linkup
Description
An authenticationFailure trap signifies that the SNMPv2 entity,
acting in an agent role, has received a protocol message that
is not properly authenticated. While all implementations of the
SNMPv2 must be capable of generating this trap, the
snmpEnableAuthenTraps object indicates whether this trap
will be generated.
Description
A notification is generated when an abnormal alarm situation
occurs or recovers from an abnormal alarm situation to
normal status. Only when the current value > low warning or
current value < high warning will send recover trap.
Binding objects:
(1) dDdmNotifyInfoIfIndex,
(2) dDdmNotifyInfoComponent
(3) dDdmNotifyInfoAbnormalLevel
(4) dDdmNotifyInfoThresholdExceedOrRecover
A notification is generated when an abnormal warning
situation occurs or recovers from an abnormal warning
situation to normal status.
Binding objects:
(1) dDdmNotifyInfoIfIndex,
(2) dDdmNotifyInfoComponent
(3) dDdmNotifyInfoAbnormalLevel
(4) dDdmNotifyInfoThresholdExceedOrRecover
Description
The commander switch will send this notification when
External alarm state is changed.
Binding objects:
(1) dExternalAlarmUnitID
(2) dExternalAlarmChannel
(3) dExternalAlarmStatus
Description
A linkUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for one
166
OID
1.3.6.1.6.3.1.1.5.5
OID
1.3.6.1.4.1.171.1
4.72.0.1
1.3.6.1.4.1.171.1
4.72.0.2
OID
1.3.6.1.4.1.171.1
4.32.0.1
OID
1.3.6.1.6.3.1.1.5.4