Asymmetric Vlan Commands - D-Link DS-3550 Command Line Interface Reference Manual

The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-3550:4#enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3550:4#
disable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric VLANs:
A
Parameters
Used to enable the asymmetric VLAN function on the switch.
enable asymmetric_vlan
This command enables the asymmetric VLAN function on the switch
None.
Only administrator-level users can issue this command.
Used to disable the asymmetric VLAN function on the switch.
disable asymmetric_vlan
This command disables the asymmetric VLAN function on the switch
None.
Only administrator-level users can issue this command.
100
VLAN C
SYMMETRIC
16
OMMANDS