Asymmetric Vlan Commands - D-Link xStack DES-3528 Series Cli Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
A
SYMMETRIC
The asymmetric VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
enable asymmetric_vlan
disable asymmetric_vlan
show asymmetric_vlan
Each command is listed, in detail, in the following sections.
enable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable asymmetric VLANs:
DES-3528:admin# enable asymmetric_vlan
Command: enable asymmetric_vlan
Success.
DES-3528:admin#
disable asymmetric_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable asymmetric VLANs:
DES-3528:admin# disable asymmetric_vlan
Command: disable asymmetric_vlan
Success.
DES-3528:admin#
show asymmetric_vlan
Purpose
Syntax
Description
Parameters
VLAN C
OMMANDS
Parameters
Used to enable the asymmetric VLAN function on the Switch.
enable asymmetric_vlan
This command enables the asymmetric VLAN function on the Switch
None.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to disable the asymmetric VLAN function on the Switch.
disable asymmetric_vlan
This command disables the asymmetric VLAN function on the Switch
None.
Only Administrator and Operator and Power-User-level users can issue this command.
Used to view the asymmetric VLAN state on the Switch.
show asymmetric_vlan
This command displays the asymmetric VLAN state on the Switch.
None.
133