Fcan-01 Configuration Parameters - Group A (Group 1) - ABB FCAN-01 User Manual

FCAN-01 configuration parameters – group A (group 1)
Note: The actual parameter group number depends on the drive
type. Group A (group 1) corresponds to:
•
parameter group 51 in ACS355, ACSM1 and ACS850
•
parameter group 51 in ACS880 if the adapter is installed as
fieldbus adapter A or group 54 if the adapter is installed as
fieldbus adapter B.
No. Name/Value
01 FBA TYPE
02 Node ID
1...127
Description
Read-only. Shows the fieldbus adapter type as
detected by the drive. Value cannot be adjusted
by the user.
If the value is 0 = None, the communication
between the drive and the module has not been
established.
Selects the node address of the module.
Each device on the CANopen network must
have a unique node identifier. Used to define a
node identifier for the drive it is connected to.
Node address
Start-up 39
Default
setting
1 =
CAN-
open
3