Fcan-01 - ABB FCAN-01 User Manual

158 Technical data

FCAN-01

The following figure describes the enclosure of the adapter module
from the front and side.
Mounting
Degree of protection
Ambient conditions
Indicators
Connectors
Power supply
General
Into the option slot on the drive
IP20
Applicable ambient conditions specified for the
drive in its manuals are in effect.
Three bicolor LEDs: HOST, MODULE,
NETWORK
20-pin connector to drive (X2)
9-pin male D-SUB connector to bus (X1)
+3.3 V ±5% max. 300 mA (supplied by the drive)
Complies with EMC standard EN 61800-3:2004.
Bus interface functionally isolated from the drive
Printed circuit board conformal coated