ABB FCAN-01 User Manual page 50

50 Start-up
No. Name/Value
31 D2FBA comm sta
0 = Idle
1 = Exec.init
2 = Time out
3 = Conf.err
4 = Off-line
5 = On-line
6 = Reset
32 FBA comm SW
rev
33 FBA appl SW ver
Description
Read-only. Displays the status of the fieldbus
adapter module communication.
Note: The value names may vary by drive.
Adapter is not configured.
Adapter is initializing.
Time-out has occurred in the communication
between the adapter and the drive.
Adapter configuration error: Major or minor
revision code of the common program revision
in the fieldbus adapter module is not the
revision required by the module or mapping file
upload has failed more than three times.
Adapter is off-line.
Adapter is on-line.
Adapter is performing a hardware reset.
Read-only. Displays the common program
revision of the adapter module in format axyz,
where:
a = major revision number
xy = minor revision numbers
z = correction number or letter.
Example: 190A = revision 1.90A
Common program version of the adapter
module
Read-only. Displays the application program
revision of the adapter module in format axyz,
where:
a = major revision number
xy = minor revision numbers
z = correction number or letter.
Example: 190A = revision 1.90A
Application program revision of the adapter
module
Default
setting
0 = Idle
OR
4 = Off-
line
N/A
N/A