Prerequisites - Cisco ASR 1000 Series Software Configuration Manual

Prerequisites

Release
Cisco IOS XE Release 3.3.0S
Cisco IOS XE Release 3.2.0S
Prerequisites
The following table is the software and hardware compatibility requirement matrix for installing a SPA-DSP:
Table 39: SPA-DSP Hardware and Software Requirements
Type of DSP
SPA (Product ID)
SPA-DSP
Rules for Installing SPA-DSP
This section provides detailed information about the rules for installing SPA-DSP on Cisco ASR 1000 Series
Aggregation Services Routers. For installing a SPA-DSP, you need to adhere to the following rules.
1 The Cisco ASR 1000 Series Aggregation Services Routers must be installed with Advanced Enterprise
Services K9 (AESK9) only. The following table provides details regarding the feature set, Universal
Software Image Part Number, and Technology Package License Part Number required for installation of
SPA-DSP.
2 Requires Cisco IOS XE Release 3.3.0S or later for all Cisco ASR 1000 Series Aggregation Services
Routers including the Cisco ASR 1001 Router.
3 Requires one CUBE feature license.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
398
Overview of the Cisco DSP SPA for the ASR 1000 Series Aggregation Services Routers
ASR1000 Router Route Processor
Chassis supported
supported
ASR 1002, ASR RP1 and RP2
1002-X, ASR
1004, and ASR
1006
Modification
The show voice dsp group all command output was
modified for SPA-DSP on the Cisco ASR 1000 Series
Aggregation Services Routers.
Introduced a new DSP SPA, for the ASR 1000 Series
to enable transcoding and transrating services for
voice.
SIPs supported ESPs supported
SIP10 and ESP10, ESP40,
SIP40 and ESP100
Minimum Cisco
IOS XE Software
Release
supported
Cisco IOS XE
Release 3.2s
OL-14127-17