Restrictions - Cisco ASR 1000 Series Software Configuration Manual

Overview of the POS SPAs
• NetFlow Data Export
• RFC 3592 performance statistics for timed intervals (current, 15-minute, multiple 15-minute, and 1-day

Restrictions

The following table provides information about POS feature compatibility and restrictions by SIP and SPA
combination. For SIP-specific features and restrictions see Overview of SIP .
Table 21: POS Feature Compatibility and Restrictions by SIP and SPA Combination
Feature
Bridge Control Protocol (BCP)
Dynamic Packet Transport (DPT), which includes
RPR/SRP
Frame Relay
The followings are the restrictions for 1-port OC-48 POS/RPR SPA
• Line Remote Error Indication (LREI) and Path Remote Error Indication (PREI) alarms are not reported
Supported MIBs
The following MIBs are supported for the POS SPAs on the Cisco ASR 1000 Series Routers:
OL-14127-17
intervals):
◦ Section CV (code violations)
◦ Section ES (errored seconds)
◦ Section SES (severely errored seconds)
◦ Near end & Far end Line CV
◦ Near end & Far end Line ES
◦ Near end & Far end Line SES
◦ Near end & Far end Line UAS (unavailable seconds)
◦ Near end & Far end Path CV
◦ Near end & Far end Path ES
◦ Near end & Far end Path SES
◦ Near end & Far end Path UAS
on the 1-port OC-48 POS/RPR SPA.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Cisco ASR1000-SIP10
Not supported on any POS SPAs.
Not supported on any POS SPAs.
Supported on all POS SPAs.
Restrictions
Everest 16.5
187