Supported Features - Cisco ASR 1000 Series Software Configuration Manual

Overview of the POS SPAs
• OC-12c/STM-4—622.080 Mbps
• OC-48c/STM-16—2.488 Gbps
• OC-192/STM-64 XFP—9.95 Gbps

Supported Features

The following features are supported for Packet over SONET (POS) SPAs on Cisco ASR 1000 Series
Aggregation Services Routers:
• Small form-factor pluggable (SFP) and XFP optics module OIR
• Field-programmable gate array (FPGA) upgrade support
• IPv4 and IPv6 addressing
SONET/SDH Compliance Features
The Compliance features supported for the Packet over SONET (POS) SPAs on Cisco ASR 1000 Series
Aggregation Services Routers are as follows:
• American National Standards Institute (ANSI) T1.105
• ITU-T G.707, G.783, G.957, G.958
• Telcordia GR-253-CORE: SONET Transport Systems: Common Generic Criteria
• Telcordia GR-1244: Clocks for the Synchronized Network: Common Generic Criteria
SONET/SDH Error, Alarm, and Performance Monitoring Features
The performance monitoring features for the Packet over SONET (POS) SPAs on Cisco ASR 1000 Series
Aggregation Services Routers are as follows:
• Signal failure bit error rate (SF-BER)
• Signal degrade bit error rate (SD-BER)
• Signal label payload construction (C2)
• Path trace byte (J1)
• Section Loss of signal (LOS)
• Section Loss of frame (LOF)
• Section Error counts for B1
• Section Threshold crossing alarms (TCA) for B1
• Line alarm indication signal (LAIS)
• Line remote defect indication (LRDI)
OL-14127-17
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Supported Features
Everest 16.5
185