Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual

Configuring 1-Port 10-Gigabit Ethernet LAN/WAN PHY SPA
Command or Action
Step 7
exit
Example:
Router(config-if)# exit
Step 8 exit
Example:
Router(config)# exit
Step 9 show running-config interface
Tengigabitethernet slot/subslot/port
Example:
Router# show running-config interface
TenGigabitethernet 0/1/0
Example:
Example:
Building configuration...
Example:
Example:
Current configuration : 115 bytes
Example:
!
Example:
interface TenGigabitEthernet0/1/0
Example:
mtu 9216
Example:
ip address 10.1.1.1 255.0.0.0
Example:
standby 0 ip 10.1.1.2 secondary

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS

XE Everest 16.5
150
Purpose
Exits interface-configuration (config-if) mode and enters configuration
mode.
Exits global-configuration (config) mode and enters privilege-exec mode.
Displays the interface configuration details for the WAN PHY SPA installed
at 0/1/0.
Configuring the Ethernet SPAs
OL-14127-17