Page 1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide July 25, 2011 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-16506-10...
Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
Page 3: Table Of Contents
C H A P T E R Accessing the CLI Using a Router Console Accessing the CLI Using a Directly-Connected Console Connecting to the Console Port Using the Console Interface Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 4 C H A P T E R Running the Cisco ASR 1000 Series Routers: An Overview Running the Cisco ASR 1000 Series Routers Using Individual and Optional SubPackages: An Overview Running the Cisco ASR 1000 Series Routers Using a Consolidated Package: An Overview...
Page 5 Using ISSU to Upgrade SubPackages (Prior to Cisco IOS XE Release 2.1.2) 4-74 Upgrade Process With Service Impact for Nonredundant Platforms 4-75 Configuring SSO on a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router 4-76 Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router 4-78...
Page 6 Contents Second IOS Process on a Cisco ASR 1002 or 1004 Router Route Processor Redundancy Stateful Switchover SSO-Aware Protocol and Applications IPsec Failover Bidirectional Forwarding Detection Broadband Scalability and Performance C H A P T E R PPP Sessions and L2TP Tunnel Scaling...
Page 7 Sending Call Home Alert Group Messages Manually 7-22 Submitting Call Home Analysis and Report Requests 7-23 Sending the Output of a Command to Cisco or an E-Mail Address 7-24 How To Configure Call Home to Support the Smart Call Home Service 7-25...
Page 8 Contents Telnet and SSH Overview for the Cisco ASR 1000 Series Routers Persistent Telnet and Persistent SSH Overview Configuring a Console Port Transport Map Examples Configuring Persistent Telnet Prerequisites Examples Configuring Persistent SSH Examples 8-10 Viewing Console Port, SSH, and Telnet Handling Configurations...
Page 9 C H A P T E R Tracing Overview 13-1 How Tracing Works 13-1 Tracing Levels 13-2 Viewing a Tracing Level 13-3 Setting a Tracing Level 13-4 Viewing the Content of the Trace Buffer 13-5 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 10 Copying a Startup Configuration File to an USB Flash Disk B-14 Copying a Startup Configuration File to a TFTP Server B-15 Enabling a Second IOS Process on a Single RP Using SSO B-15 ISSU—Consolidated Package Upgrade B-19 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 11 Series Aggregation Services Routers. It is not intended as a comprehensive guide to all of the software features that can be run using the Cisco ASR 1000 Series Routers, but only the software aspects that are specific to these routers.
Page 12: Document Revision History
Preface Document Revision History The Document Revision History records technical changes to this document. The table shows the Cisco IOS XE software release number and document revision number for the change, the date of the change, and a brief summary of the change.
Page 13 Cisco ASR 1000 Series Routers. Chapter 6 Scalability and Performance Provides information on scaling and performance on the Cisco ASR 1000 Series Routers. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide xiii OL-16506-10...
Page 14: Related Documentation
Related Documentation This section refers you to other documentation that also might be useful as you configure your Cisco ASR 1000 Series Router. The documentation listed below is available online. Cisco ASR 1000 Series Routers Documentation The Cisco ASR 1000 Series has a documentation roadmap that provides listings to a broad range of documentation available for the Cisco ASR 1000 Series Routers.
Page 15 Preface The documentation homepage for Cisco IOS XE contains Cisco IOS XE technology guides and feature documentation and can be viewed at: http://cisco.com/en/US/products/ps9587/tsd_products_support_series_home.html For information on commands, see one of the following resources: Cisco IOS XE Software Command References •...
Page 16: Obtaining Documentation And Submitting A Service Request
Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
Page 17: Software Packaging On The Cisco Asr 1000 Series Routers
• ASR 1000 Series Routers Software Overview The Cisco ASR 1000 Series Routers run using Cisco IOS XE software. Cisco IOS XE is released using consolidated packages and optional subpackages. Each consolidated package contains a collection of software subpackages. Each software subpackage is an individual software file that controls a different element or elements of the Cisco ASR 1000 Series Router.
Page 18: Important Information About Consolidated Packages
Consolidated Packages A consolidated package is a single image composed of individual software subpackage files. A single consolidated package file is a bootable file, and the Cisco ASR 1000 Series Router can be run using the consolidated package. Note Consolidated packages only contain the required individual subpackage files.
Page 19: C H A P T E R 1 Software Packaging And Architecture
Individual Software SubPackages Within a Consolidated Package provides an overview of the Cisco ASR 1000 Series Routers subpackages and the purpose of each individual subpackage. Every consolidated package will have all of these individual subpackages. To see additional information about each individual subpackages in a particular Cisco IOS XE release, see Cisco IOS XE Release Notes for that release.
Page 20: Optional Software Subpackages Outside Of Consolidated Packages
Software Packaging on the Cisco ASR 1000 Series Routers Optional Software SubPackages Outside of Consolidated Packages Beginning in Cisco IOS XE Release 2.4, the ASR 1000 Series Routers support a new type of subpackage—this is an optional software subpackage that is available as a separate, external package that is downloaded and installed along with the other required subpackages.
Page 21: Important Notes About Provisioning Files
“packages.conf”, so no changes have to be made to the boot statement when Cisco IOS XE is upgraded (the boot system file-system:packages.conf configuration command can remain unmodified before and after an upgrade).
Page 22: Processes Overview
These processes run in the background, and the CLI on Cisco ASR 1000 Series Routers using Cisco IOS-XE is identical in look, feel, and usage to the Cisco IOS CLI on most platforms. This information is provided because it may be useful for checking router state and troubleshooting, but understanding this information is not essential to understanding most router operations.
Page 23: Ios As A Process
This architecture allows for better allocation of memory so the router can run more efficiently. Furthermore, the Cisco ASR 1000 Series Routers has a command-line interface in diagnostic mode that can be accessed in certain scenarios even if the IOS process fails. See the “Understanding the Diagnostic...
Page 24: Dual Ios Processes
Using SSO or RPR, a second IOS process can be enabled on a Cisco ASR 1002 or 1004 Router. On Cisco ASR 1000 Series Routers configured with dual Route Processors, the second IOS process runs on the standby Route Processor.
Page 25: Autogenerated File Directories And Files
Autogenerated File Directories and Files This section discusses the autogenerated files and directories that might appear on your Cisco ASR 1000 Series Routers, and how the files in these directories can be managed.
Page 26 Chapter 1 Software Packaging and Architecture Processes Overview Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 1-10 OL-16506-10...
Page 27: Accessing The Cli Using A Router Console
C H A P T E R Using Cisco IOS XE Software This chapter provides information to prepare you to configure the Cisco ASR 1000 Series Routers: Accessing the CLI Using a Router Console, page 2-1 • Using the Auxiliary Port, page 2-4 •...
Page 28: Chapter 2 Using Cisco Io Xe Software
RJ-45-to-DB-9 DTE adapter (labeled “Terminal”). Using the Console Interface Every RP on a Cisco ASR 1000 Series Router has a console interface. Notably, a standby RP can be accessed using the console port in addition to the active RP in a dual RP configuration.
Page 29: Accessing The Cli From A Remote Console Using Telnet
In this syntax, host is the router hostname or an IP address, port is a decimal port number (23 is the default), and keyword is a supported keyword. For more information, see the Cisco IOS Configuration Fundamentals Command Reference Guide.
Page 30: Accessing The Cli From A Remote Console Using A Modem
To access the router remotely using a modem through an asynchronous connection, connect the modem to the console port. The console port on a Cisco 7600 series router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector. The console port is located on the front panel of the RP.
Page 31: Using Keyboard Shortcuts
Ctrl-P or the Up Arrow key. Router# show history While in EXEC mode, list the last several commands you have just entered. 1. The arrow keys function only on ANSI-compatible terminals such as VT100s. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 32: Understanding The Command Mode
Cisco IOS XE. You use the CLI to access Cisco IOS XE software. Because the CLI is divided into many different modes, the commands available to you at any given time depend on the mode that you are currently in. Entering a question mark (?) at the CLI prompt allows you to obtain a list of commands available for each command mode.
Page 33: Understanding The Diagnostic Mode
60 seconds while the system is booting. Understanding the Diagnostic Mode Diagnostic mode is new on the Cisco ASR 1000 Series Routers. The router boots up or accesses diagnostic mode in the following scenarios: The IOS process or processes fail, in some scenarios. In other scenarios, the RP will simply reset •...
Page 34: Getting Help
ROMmon, to diagnose and troubleshoot IOS problems. The diagnostic mode commands are stored in the nonIOS packages on the Cisco ASR 1000 Series Routers, which is why the commands are available even if the IOS process is not working properly.
Page 35 Router(config)# interface serial 4/0 Router(config-if)# When the <cr> symbol is displayed, you can press Enter to complete the command. You are in interface configuration mode when the prompt changes to Router(config-if)#. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 36 Enable forwarding of directed broadcasts dvmrp DVMRP interface commands hello-interval Configures IP-EIGRP hello interval helper-address Specify a destination address for UDP broadcasts hold-time Configures IP-EIGRP hold time Router(config-if)# ip Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2-10 OL-16506-10...
Page 37: Using The No And Default Forms Of Commands
For example, IP routing is enabled by default. To disable IP routing, use the no ip routing command; to re-enable IP routing, use the ip routing command. The Cisco IOS software command reference publications provide the complete syntax for the configuration commands and describe what the no form of a command does.
Page 38: Saving Configuration Changes
This configuration file storage setup is not unique to the Cisco ASR 1000 Series Routers and is used on several Cisco router platforms. As a matter of routine maintenance on any Cisco router, users should backup the startup configuration file by copying the startup configuration file from NVRAM onto one of the router’s other file systems...
Page 39: Filtering The Output Of The Show And More Commands
3517 bytes copied in 0.122 secs (28828 bytes/sec) For more detailed information on managing configuration files, see the Managing Configuration Files section in the Cisco IOS XE Configuration Fundamentals Configuration Guide. Filtering the Output of the show and more Commands You can search and filter the output of show and more commands.
Page 40: Powering Off A Router
To identify the set of software images available in a specific release or to find out if a feature is available in a given Cisco IOS XE software image, you can use Cisco Feature Navigator or the software release notes.
Page 41: Using The Software Advisor
Using the Software Advisor To see if a feature is supported by a Cisco IOS XE release, to locate the software document for that feature, or to check the minimum software requirements of Cisco IOS XE software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com at...
Page 42 Chapter 2 Using Cisco IOS XE Software Finding Support Information for Platforms and Cisco Software Images Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 2-16 OL-16506-10...
Page 43: Running The Cisco Asr 1000 Series Routers: An Overview
Management This chapter discusses how consolidated packages and software subpackages (individual and optional) are managed and are used to run the Cisco ASR 1000 Series Aggregation Services Routers. It contains the following sections: Running the Cisco ASR 1000 Series Routers: An Overview, page 3-1 •...
Page 44: Overview
When a Cisco ASR 1000 Series Router is configured to run using the consolidated package file, more memory is required to process router requests because the router has to search one larger file for every request.
Page 45: C H A P T E R 3 Consolidated Packages And Subpackages Management
Running the Cisco ASR 1000 Series Routers: An Overview A Cisco ASR 1000 Series Router configured to run using a consolidated package does have some advantages over a Cisco ASR 1000 Series Router configured to run individual subpackages. First, a consolidated package can be booted and utilized using TFTP or another network transport method.
Page 46: Software File Management Using Command Sets
USB Flash disk, or on any TFTP or other network server. Software File Management Using Command Sets Software files can be managed on the Cisco ASR 1000 Series Routers using three distinct command sets. This section provides overviews of the following command sets: •...
Page 47: The Copy Command
See the copy command reference for a list of the options that are available with the copy command. The issu Command Set The issu command set that is available on other Cisco routers is also available on the Cisco ASR 1000 Series Routers. The issu command set can be used to perform both consolidated package and individual subpackage upgrades.
Page 48: Subpackages
The issu runversion command is optional for completing a consolidated package upgrade on the Cisco ASR 1000 Series Routers. You can enter issu commitversion from the active RP to complete the software upgrade, then use the redundancy force-switchover command to switch to the upgraded RP on this platform, if desired.
Page 49: Managing And Configuring A Router To Run Using A Consolidated Package
To upgrade a consolidated package on the Cisco ASR 1000 Series Routers using the copy command, copy the consolidated package into the bootflash: directory on the router using the copy command as you would on most other Cisco routers. After making this copy, configure the router to boot using the consolidated package file.
Page 50: Managing And Configuring A Consolidated Package Using The Request Platform Software Package Install Command
--- Starting installation state synchronization --- Finished installation state synchronization --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 51 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 52: Package
Router(config)# config-register 0x2102 Router(config)# boot system flash bootflash:packages.conf Router(config)# exit *May 11 01:31:04.815: %SYS-5-CONFIG_I: Configured from console by con Router# copy running-config startup-config Building configuration... [OK] Router# reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-10 OL-16506-10...
Page 53 May 22 2008 11:26:28 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 57603 -rw- 6256 May 22 2008 11:26:28 -07:00 packages.conf -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-11 OL-16506-10...
Page 54 43984 -rw- 34324684 May 27 2008 14:25:05 -07:00 asr1000rp1-sipbase.02.01.00.122-33.XNA.pkg 43985 -rw- 22124748 May 27 2008 14:25:05 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 43971 -rw- 6256 May 27 2008 14:25:05 -07:00 packages.conf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-12 OL-16506-10...
Page 55 May 22 2008 11:26:28 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 57603 -rw- 6256 May 22 2008 11:26:28 -07:00 packages.conf -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-13 OL-16506-10...
Page 56: Managing And Configuring A Router To Run Using Optional Subpackages
Building configuration... [OK] Router# reload Managing and Configuring a Router to Run Using Optional SubPackages To manage and configure a Cisco ASR 1000 Series Router to run using optional subpackages, perform the following tasks: Installing an Optional SubPackage, page 3-15 •...
Page 57: Installing An Optional Subpackage
Managing and Configuring the Router to Run Using Consolidated Packages and Individual SubPackages Installing an Optional SubPackage If you install the Cisco WebEx Node for ASR 1000 Series SPA before the software subpackage is Note installed, you will receive the error message %ASR1000_RP_SPA-3-MISSING_SPA_PKG_ERR. This message will resolve once you download and install the appropriate sipspawma subpackage and then reload the router in individual subpackage mode.
Page 58: Uninstalling An Optional Subpackage
Finished update running software SUCCESS: Finished installing software. Uninstalling an Optional SubPackage In Cisco IOS XE Release 2.4, the Cisco ASR 1000 Series Routers support removal of an installed optional subpackage. To uninstall an optional subpackage, perform the following steps:...
Page 59 Use the show version provisioned command to verify that the optional subpackage is no longer Step 2 installed. (Optional) Use the request platform software clean command to remove the unused packages. Step 3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-17 OL-16506-10...
Page 60: Troubleshooting Software Mismatch With Esp Board Asr1000-Esp10-N
This unrestricted product format, in which all encryption chips have been removed, can be provided in the Cisco ASR 1002, 1004, and 1006 Series Routers. This ESP must be used with the appropriate Cisco IOS XE 2.2 image that does not contain encryption software.
Page 61: Upgrading A Spa Subpackage
Do not run your router using subpackages from different consolidated packages. Caution The Cisco ASR 1000 Series Router is not designed to use multiple subpackages from different consolidated packages. Running subpackages from different consolidated packages is not recommended and can cause unpredictable router behavior.
Page 62 Applying interim IPC and database definitions Notifying running software of updates Unblocking peer synchronization of operating information Unmounting old packages Cleaning temporary installation files Finished update running software SUCCESS: Finished installing software. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 3-20 OL-16506-10...
Page 63: Chapter 4 Software Upgrade Process
Upgrade process with service impact for nonredundant platforms—Non-hardware-redundant • chassis models (such as the Cisco ASR 1001 Router, Cisco ASR 1002 Router and Cisco ASR 1004 Router) do not support ISSU upgrade or downgrade. Instead subpackage software upgrade is supported only if the router is running in subpackage mode.Traffic loss cannot be avoided during the installation of the ESP package as a part of ISSU.
Page 64: Issu Upgrade For Redundant Platforms
These steps should be followed completely, as the Cisco ASR 1000 Series Routers are designed to run one version of Cisco IOS XE for all consolidated packages and subpackages on an RP, and running subpackages from different versions of Cisco IOS XE can cause unexpected router behavior.
Page 65: Issu Rollback Timer Overview
The Cisco ASR 1000 Series Router ISSU procedure has a rollback timer. Rollback timers are used for for ISSU procedures on all Cisco routers that support ISSU, but this section will provide a brief overview of ISSU rollback timers on the Cisco ASR 1000 Series Routers.
Page 66: Software Upgrade With Dual Ios Processes On A Single Rp Overview
Most SSO-capable features in each Cisco IOS XE release are ISSU capable. ISSU is only supported if SSO is enabled in the configuration and the system is in a steady state (SSO ready state has been achieved). ISSU compatibility depends on the set of specific feature clients that are in use and whether they support ISSU.
Page 67: Restrictions For Issu
For ATM SPAs on the Cisco ASR1000 Series Routers, ISSU from releases prior to Cisco IOS XE • Release 2.5.0 to Cisco IOS XE Release 2.5.0, or from Cisco IOS XE Release 2.5.0 to a release prior to Cisco IOS XE Release 2.5.0, is not supported. If you want to perform ISSU in this environment, you must first remove the configuration from the ATM SPAs on the router, and then shut down the SPAs using the shutdown command prior to running the ISSU process.
Page 68 0 To copy a file using TFTP through the Note Management Ethernet interface, the ip tftp source-interface GigabitEthernet 0 command must be entered before entering the copy tftp command. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 69 You can also monitor the terminal state using the show platform command. After ISSU runversion is completed, a switchover will automatically occur and the standby RP will become the active RP. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 70: Configuration
Router# hw-module slot R0 reload Examples The following example shows how to perfrom consolidated package upgrade in a dual route processor configuration: Router(config)# ip tftp source-interface gigabitethernet 0 Router# copy tftp bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 71 7516 Jul 2 2008 15:01:39 -07:00 startup-config -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz -rw- 209227980 Jul 17 2008 16:06:58 -07:00 asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin 928862208 bytes total (76644352 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 72 *Jul 21 23:37:05.528: %ASR1000_OIR-6-ONLINECARD: Card (rp) online in slot R1 *Jul 21 23:37:25.480: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4)) *Jul 21 23:37:25.480: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-10 OL-16506-10...
Page 73 Router# hw-module slot R0 reload Proceed with reload of module? [confirm] *Jul 21 23:54:27.271: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_NOT_PRESENT) *Jul 21 23:54:27.271: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_DOWN) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-11 OL-16506-10...
Page 74: Using Issu To Upgrade The Subpackages In A Dual Route Processor Configuration
• platform command set), page 4-45 Using ISSU to Upgrade the SubPackages on a Cisco ASR 1006 or ASR 1013 Router (issu Command Set) This section provides the instructions for performing an ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set.
Page 75 URL-to-active-file-system:asr1000rp1-esp*version*.pkg slot active-ESP-slot issu commitversion issu loadversion rp active-RP file URL-to-active-file-system:asr1000rp1*version*.pkg force show version active-RP provisioned show version active-RP installed redundancy force-switchover request platform software package clean Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-13 OL-16506-10...
Page 76 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-14 OL-16506-10...
Page 77 ISSU upgrade has been completed. target-URL Step 7 (Optional) Display the directory to confirm that the files were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-15 OL-16506-10...
Page 78 3.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33. XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpcontrol.02.02.01.122- 33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpios-adventerprisek9.0 2.02.01.122-33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33 .XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33. XNB1.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-16 OL-16506-10...
Page 79 Example: Router# issu loadversion rp 1 file stby-bootflash:asr1000rp*02.02.01.122-33.XNB1*. pkg force standby-RP Step 11 Reload the standby RP. hw-module slot reload Example: Router# hw-module slot R1 reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-17 OL-16506-10...
Page 80 Step 15 (Optional) Confirm that the subpackages are provisioned show version provisioned active-RP show version installed and installed. Example: Router# show version r0 provisioned Router# show version r0 installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-18 OL-16506-10...
Page 81 Example: Router# request platform software package clean Examples The following example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup using the issu command set Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 82 File: bootflash:asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 661bcb2efda479533c87f23504bf7021d42b3165 Package: rpaccess, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg , on: RP1 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-20 OL-16506-10...
Page 83 File: bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 31b36be34aa63e0aafbb8abb2cc40a0cbcd5f68e Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0/0 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-21 OL-16506-10...
Page 84 File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/2 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/3 Built: 2008-09-24_03.46, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-22 OL-16506-10...
Page 85 Address or name of remote host []? 172.17.16.81 Source filename []? /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin Destination filename [asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin]? Accessing tftp://172.17.16.81//auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin... Loading /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin from 172.17.16.81 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-23 OL-16506-10...
Page 86 Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 20533452 bytes copied in 2.346 secs (8752537 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-24 OL-16506-10...
Page 87 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 26366156 bytes copied in 2.857 secs (9228616 bytes/sec) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-25 OL-16506-10...
Page 88 Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-26 OL-16506-10...
Page 89 New software will load on reboot. Router# hw-module slot r1 reload Router# *Sep 25 19:16:29.709: %ASR1000_OIR-6-OFFLINECARD: Card (rp) offline in slot R1 *Sep 25 19:16:29.787: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_NOT_PRESENT) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-27 OL-16506-10...
Page 90 WARNING: Candidate software combination not found in compatibility database WARNING: Software sets are identified as compatible Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-28 OL-16506-10...
Page 91 FPD ID=1) in the list of FPD IDs populated for SPA-4XT-SERIAL card in subslot 0/0. *Sep 29 15:13:21.634: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XT-SERIAL) online in subslot 0/0Cleaning temporary installation files Finished update running software SUCCESS: Finished installing software. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-29 OL-16506-10...
Page 92 Finished candidate package set construction --- Starting compatibility testing --- Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-30 OL-16506-10...
Page 93 *Sep 29 15:18:32.259: %SPA_OIR-6-ONLINECARD: SPA (SPA-2X1GE-V2) online in subslot 1/1 *Sep 29 15:18:33.572: %SPA_OIR-6-ONLINECARD: SPA (SPA-1XOC12-POS) online in subslot 1/3Cleaning temporary installation files Finished update running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-31 OL-16506-10...
Page 94 Finished candidate package set construction --- Starting compatibility testing --- Determining whether candidate package set is compatible WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-32 OL-16506-10...
Page 95 --- Starting installation state synchronization --- Finished installation state synchronization --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-33 OL-16506-10...
Page 96 Finding latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-34 OL-16506-10...
Page 97 WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Determining whether installation is valid Software sets are identified as compatible Checking IPC compatibility with running software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-35 OL-16506-10...
Page 98 Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Locating image files and validating name syntax Inspecting image file types Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-36 OL-16506-10...
Page 99 File SHA1 checksum: 32b3fceaf59e3acd7cf9937ef33a822d6b359887 Package: rpaccess, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-37 OL-16506-10...
Page 100 File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios-adventerprisek9, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-38 OL-16506-10...
Page 101 File: unknown, on: SIP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: active File: unknown, on: SIP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-39 OL-16506-10...
Page 102 File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_01 00_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-40 OL-16506-10...
Page 103 File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Package: rpcontrol, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_01 00_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-41 OL-16506-10...
Page 104 File: unknown, on: SIP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: inactive File: unknown, on: SIP1/2 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-42 OL-16506-10...
Page 105 File is in use, will not delete. asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_ 0100_1.pkg File is in use, will not delete. asr1000rp1-sipbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg File is in use, will not delete. asr1000rp1-sipspa.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg File is in use, will not delete. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-43 OL-16506-10...
Page 106 Deleting file bootflash:asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LAT EST_20080924_0100_1.conf ... done. Deleting file bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pk g ... done. Deleting file bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_200809 24_0100_1.pkg ... done. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-44 OL-16506-10...
Page 107 SUCCESS: Files deleted. Using ISSU to Upgrade SubPackages on a Cisco ASR 1006 Router or ASR 1013 Router (request platform command set) This procedure can only be performed if the current ASR 1006 router or ASR 1013 router has two active RPs and both RPs are running subpackages.
Page 108 URL-to-active-file-system:asr1000rp1-esp*version*.pkg slot active-ESP-slot request platform software package install rp active-RP file URL-to-active-file-system:asr1000rp*version*.pkg force show version active-RP provisioned show version active-RP installed redundancy force-switchover request platform software package clean Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-46 OL-16506-10...
Page 109 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-47 OL-16506-10...
Page 110 ISSU upgrade has been completed. target-URL Step 6 (Optional) Displays the directory to confirm that the files were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-48 OL-16506-10...
Page 111 3.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33. XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpcontrol.02.02.01.122- 33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-rpios-adventerprisek9.0 2.02.01.122-33.XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33 .XNB1.pkg bootflash: Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33. XNB1.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-49 OL-16506-10...
Page 112 Router# request platform software package install rp 1 file stby-bootflash:asr1000rp*02.02.01.122-33.XNB1*. pkg force standby-RP Step 10 Reloads the standby RP. hw-module slot reload Example: Router# hw-module slot R1 reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-50 OL-16506-10...
Page 113 Step 14 (Optional) Confirms the subpackages are provisioned and show version provisioned active-RP show version installed installed. Example: Router# show version r0 provisioned Router# show version r0 installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-51 OL-16506-10...
Page 114 (Optional) Removes all unused subpackage files from the request platform software package clean router. Examples This example shows ISSU upgrade using subpackages on a Cisco ASR 1006 router or ASR 1013 router with a dual RP setup: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 115 RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 661bcb2efda479533c87f23504bf7021d42b3165 Package: rpaccess, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg , on: RP1 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: b0dc8e07cd4f997b045280fa79051e41068c6f3e Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-53 OL-16506-10...
Page 116 SIP0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 31b36be34aa63e0aafbb8abb2cc40a0cbcd5f68e Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP0/0 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-54 OL-16506-10...
Page 117 SIP1/2 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Package: sipspa, version: BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg, on: SIP1/3 Built: 2008-09-24_03.46, by: mcpre File SHA1 checksum: 337c662bcea5d34736e6df3acf7d7cb2a0a8c2f7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-55 OL-16506-10...
Page 118 Source filename []? /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin Destination filename [asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin]? Accessing tftp://172.17.16.81//auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin... Loading /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin from 172.17.16.81 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!! [OK - 209227980 bytes] Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-56 OL-16506-10...
Page 119 Router# copy usb0:221subs/asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpaccess.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 20533452 bytes copied in 2.346 secs (8752537 bytes/sec) Router# copy usb0:221subs/asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-rpbase.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-57 OL-16506-10...
Page 120 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 26366156 bytes copied in 2.857 secs (9228616 bytes/sec) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-58 OL-16506-10...
Page 121 Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg stby-bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-59 OL-16506-10...
Page 122 Finished commit of software changes SUCCESS: Software provisioned. New software will load on reboot. Router# hw-module slot r1 reload Router# *Sep 25 18:20:15.371: %ASR1000_OIR-6-OFFLINECARD: Card (rp) offline in slot R1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-60 OL-16506-10...
Page 123 WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: WARNING: WARNING: Candidate software combination not found in compatibility database WARNING: Software sets are identified as compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-61 OL-16506-10...
Page 124 Unblocking peer synchronization of operating information *Sep 29 13:49:01.336: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XT-SERIAL) online in subslot 0/0 *Sep 29 13:49:03.344: %LINK-3-UPDOWN: Interface Serial0/0/2, changed state to downUnmounting old packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-62 OL-16506-10...
Page 125 --- Starting image file verification --- Checking image file names Verifying image file locations Locating image files and validating name syntax Inspecting image file types Processing image file constraints Creating candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-63 OL-16506-10...
Page 126 *Sep 29 13:53:01.373: %SPA_OIR-6-OFFLINECARD: SPA (SPA-4X1FE-TX-V2) offline in subslot 1/0 *Sep 29 13:53:01.378: %SPA_OIR-6-OFFLINECARD: SPA (SPA-2X1GE-V2) offline in subslot 1/1 *Sep 29 13:53:01.381: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1XOC12-POS) offline in subslot 1/3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-64 OL-16506-10...
Page 127 Processing candidate provisioning file Constructing working set for candidate package set Constructing working set for running package set Checking command output Constructing merge of running and candidate packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-65 OL-16506-10...
Page 128 Finished installation state synchronization --- Starting file path checking --- Finished file path checking --- Starting image file verification --- Checking image file names Verifying image file locations Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-66 OL-16506-10...
Page 129 Finding latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Replacing CLI software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-67 OL-16506-10...
Page 130 Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing --- Starting impact testing --- Checking operational impact of change Finished impact testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-68 OL-16506-10...
Page 131 WARNING: requires software reboot of target RP Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Processing candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-69 OL-16506-10...
Page 132 00_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios-adventerprisek9, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: active File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP0/0 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-70 OL-16506-10...
Page 133 00_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a544cd10841b237066ccbc4714f4e23c00a9d2e5 Package: rpios-adventerprisek9, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST _20080924_0100_1.pkg, on: RP1/1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: a4967ac35d6ac37ef275b28e032773762be9f202 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-71 OL-16506-10...
Page 134 File: unknown, on: SIP1/3 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: inactive File: unknown, on: SIP2 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-72 OL-16506-10...
Page 135: In Service One-Shot Software Upgrade Procedure
ISSU Procedures (Prior to Cisco IOS XE Release 2.1.2) These instructions should be followed only if you are upgrading using ISSU to a pre-Cisco IOS XE 2.1.2 release. If you are using Cisco IOS XE Release 2.2.1 or later, follow the earlier instructions in this chapter to perform your ISSU upgrade.
Page 136: (Prior To Cisco Ios Xe 2.1.2)
This procedure will work on single RPs configured to run two IOS processes or on routers configured with dual RPs. Versions of Cisco IOS XE Release 2.1 prior to Cisco IOS XE Release 2.1.2 and versions of Cisco IOS XE Release 2.2 prior to Cisco IOS XE Release 2.2.1 and installations not booted from the RPBase subpackage on Cisco IOS XE Release 2.2.1 or 2.1.2 require a different ISSU upgrade procedure.
Page 137: Upgrade Process With Service Impact For Nonredundant Platforms
For the Cisco ASR 1001 Router, the Cisco IOS Software redundancy requires 8-GB DRAM and the IOS software redundancy license. The Cisco ASR 1002 and ASR 1002-F Routers come by default with 4-GB DRAM. The Cisco ASR 1001 Note Router comes by default with 4-GB DRAM, and is upgradeable up to 8-GB or 16-GB DRAM.
Page 138 In the example show version output, the router has 4 GB of DRAM memory. If you are using a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router with 2-GB DRAM memory on the RP, SSO cannot be configured on your RP.
Page 139 In this example, the show platform command output reveals that R0/0 is the active IOS process and R0/1 is the standby IOS process: Router# show platform Chassis type: ASR1004 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-77 OL-16506-10...
Page 140 00:51:57 Using SubPackages for Software Upgrade on a Cisco ASR 1001 Router This section provides instructions on using software upgrade for Cisco ASR 1001 Router running subpackages. These instructions assume two IOS processes are active on the RP and that the router is already running using subpackages.
Page 141 0 file file-system:asr1001-{rpbase,sipbase,sipspa,espbase}*version*.pkg force show version installed reload Step 17 does not have to be performed immediately, and should be done at a convenient time. Note Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-79 OL-16506-10...
Page 142 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-80 OL-16506-10...
Page 143 Router# copy 221subs/asr1001-espbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpcontrol.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-rpios-universalk9.03.02.01.S.151-1. S1_2.pkg bootflash: Router# copy 221subs/asr1001-sipbase.03.02.01.S.151-1.S1_2.pkg bootflash: Router# copy 221subs/asr1001-sipspa.03.02.01.S.151-1.S1_2.pkg bootflash: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-81 OL-16506-10...
Page 144 Step Example: Router# issu loadversion rp 0 file bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02. 01.S.151-1.S1_2*.pkg bay 0 force Step 14 Commit the software version. issu commitversion Example: Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-82 OL-16506-10...
Page 145 It is highly recommended reload to avoid conflicts in the software base. Examples The following example shows the software upgrade for Cisco ASR 1001 Router running subpackages. Router#show version Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Experimental Version 15.1(20110301:124851) [asr1001-universalk9.03.02.01.S.151-1.S1] Copyright (c) 1986-2011 by Cisco Systems, Inc.
Page 146 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 147 Router# copy tftp: 221subs Address or name of remote host []? 172.27.55.254 Source filename []? /auto/users/asr1001-universalk9.03.02.01.S.151-1.S1_2.bin,12 Destination filename [asr1001-universalk9.03.02.01.S.151-1.S1.bin,12]? Accessing tftp://172.27.55.254//auto/users/asr1001-universalk9.03.02.01.S.151-1.S1_2.bin,12... Loading /auto/users/asr1001-universalk9.03.02.01.S.151-1.S1.bin,12 (via GigabitEthernet0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-85 OL-16506-10...
Page 148 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 51904716 bytes copied in 5.478 secs (9475122 bytes/sec) Router# copy 221subs/asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg bootflash: Destination filename [asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-86 OL-16506-10...
Page 149 1 force --- Starting local lock acquisition on R0 --- Finished local lock acquisition on R0 --- Starting file path checking --- Finished file path checking Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-87 OL-16506-10...
Page 150 No old package files removed New files list: Added asr1001-rpaccess.03.02.01.S.151-1.S1_2.pkg Added asr1001-rpcontrol.03.02.01.S.151-1.S1_2.pkg Added asr1001-rpios-universalk9.03.02.01.S.151-1.S1_2.pkg Finished list of software package changes --- Starting commit of software changes --- Updating provisioning rollback files Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-88 OL-16506-10...
Page 151 *Mar 15 16:31:00.015: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN) *Mar 15 16:31:00.015: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_REDUNDANCY_) *Mar 15 16:31:00.328: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up *Mar 15 16:31:00.328: %LINK-3-UPDOWN: Interface EOBC0, changed state to up Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-89 OL-16506-10...
Page 152 Software sets are identified as compatible Verifying image type compatibility Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-90 OL-16506-10...
Page 153 *Mar 15 16:37:01.961: %CMRP-6-THROUGHPUT_LICENSE: R0/0: cmand: Throughput liceG *Mar 15 16:37:06.571: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0 is pre-relean Notifying running software of updates Unblocking peer synchronization of operating information Unmounting old packages Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-91 OL-16506-10...
Page 154 Checking infrastructure compatibility with running software ... skipped Checking package specific compatibility Finished compatibility testing --- Starting list of software package changes --- Old files list: Removed asr1001-espbase.03.02.01.S.151-1.S1.pkg Removed asr1001-rpbase.03.02.01.S.151-1.S1.pkg Removed asr1001-sipbase.03.02.01.S.151-1.S1.pkg Removed asr1001-sipspa.03.02.01.S.151-1.S1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-92 OL-16506-10...
Page 155 --- Starting commit of software changes --- Updating provisioning rollback files Creating pending provisioning file Committing provisioning file Finished commit of software changes SUCCESS: Software provisioned. New software will load on reboot. Router# reload Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-93 OL-16506-10...
Page 156 Software Upgrade Process Upgrade Process With Service Impact for Nonredundant Platforms Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (software upgrade Command Set) This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router running subpackages.
Page 157 Note Step 19, 20, and 21 does not have to be performed immediately, and can be done at a convenient time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-95 OL-16506-10...
Page 158 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-96 OL-16506-10...
Page 159 ISSU upgrade has been completed. Step 7 (Optional) Display the directory to confirm that the files dir target-URL were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-97 OL-16506-10...
Page 160 Router# issu loadversion rp 0 file bootflash:asr1000rp1-{rpaccess,rpios,rpcontrol} *02.02.01.122-33.XNB1*.pkg bay 1 force Step 10 Once the SSO state is reached, commit the software issu commitversion version. Example: Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-98 OL-16506-10...
Page 161 122-33.XNB1*.pkg slot 2 force See the “ISSU Procedures (Prior to Cisco IOS XE Router# issu commitversion Release 2.1.2)” section on page 4-73 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-99 OL-16506-10...
Page 162 (Optional) Removes the unused subpackages from the request platform software package clean router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 163 CPLD Version Firmware Version --------- ------------------- --------------------------------------- 07091401 12.2(33r)XN1 07062111 12.2(33r)XN2 07091401 12.2(33r)XN1 Router# mkdir usb0:221subs Create directory filename [221subs]? Created dir bootflash:221subs Router(config)# ip tftp source-interface gigabitethernet 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-101 OL-16506-10...
Page 164 224768204 Oct 7 2008 15:38:57 -07:00 asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin 928862208 bytes total (466358272 bytes free) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-102 OL-16506-10...
Page 165 Router# copy usb0:221subs/asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-103 OL-16506-10...
Page 166 WARNING: Connection may be lost during installation of IOS package Finished impact testing --- Starting commit of software changes --- Updating provisioning rollback files Creating pending provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-104 OL-16506-10...
Page 167 *Sep 25 18:07:39.888: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO) Router# Router# issu commitversion --- Starting installation changes --- Cancelling rollback timer Finished installation changes SUCCESS: Installation changes committed Router# redundancy force-switchover Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-105 OL-16506-10...
Page 168 *Sep 25 18:09:16.717: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) *Sep 25 18:11:00.500: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded *Sep 25 18:11:00.502: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO) Router# show platform Chassis type: ASR1004 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-106 OL-16506-10...
Page 169 Checking package specific compatibility Finished compatibility testing --- Starting impact testing --- Checking operational impact of change WARNING: Connection may be lost during installation of IOS package Finished impact testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-107 OL-16506-10...
Page 170 *Sep 25 18:14:47.232: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0:0 is pre-release hardware *Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4)) *Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-108 OL-16506-10...
Page 171 Finished commit of software changes --- Starting analysis of software changes --- Finished analysis of software changes --- Starting update running software --- Blocking peer synchronization of operating information Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-109 OL-16506-10...
Page 172 *Sep 29 11:06:48.410: %SPA_OIR-6-ONLINECARD: SPA (SPA-5X1GE-V2) online in subslot 0/3 Router# Router# Router# issu commitversion --- Starting installation changes --- Cancelling rollback timer Finished installation changes SUCCESS: Installation changes committed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-110 OL-16506-10...
Page 173 Finding latest command shortlist lookup file Finding latest command shortlist file Assembling CLI output libraries Assembling CLI input libraries Applying interim IPC and database definitions Replacing running software Replacing CLI software Restarting software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-111 OL-16506-10...
Page 174 Software sets are identified as compatible Checking IPC compatibility with running software Checking candidate package set infrastructure compatibility Checking infrastructure compatibility with running software Checking package specific compatibility Finished compatibility testing Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-112 OL-16506-10...
Page 175 CPP 0 running init image /usr/cpp/bin/cpp-mcplo-ucode *Sep 25 18:24:01.077: %CPPHA-7-READY: F0: cpp_ha: CPP 0 loading and initialization complete Router# *Sep 25 18:24:01.077: %CPPHA-6-SYSINIT: F0: cpp_ha: CPP HA system configuration start. Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-113 OL-16506-10...
Page 176 New software will load on reboot. Router# show version provisioned Package: Provisioning File, version: n/a, status: active File: bootflash:packages.conf, on: RP0 Built: n/a, by: n/a File SHA1 checksum: aca136bd8bcb99f87e6aa7a0ce2a92a3b5a5a200 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-114 OL-16506-10...
Page 177 1.pkg, on: RP1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 32b3fceaf59e3acd7cf9937ef33a822d6b359887 Package: rpaccess, version: BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1, status: inactive File: bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_010 0_1.pkg, on: RP1 Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: 7c8dfdf9b2e3602b0c6c531a88dd93c8d2d180c6 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-115 OL-16506-10...
Page 178 Package: rpios-adventerprisek9, version: unknown, status: inactive File: unknown, on: SIP0/2 --More-- Built: 2008-09-24_03.52, by: mcpre File SHA1 checksum: unknown Package: rpios-adventerprisek9, version: unknown, status: active File: unknown, on: SIP0/3 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-116 OL-16506-10...
Page 179 Cleaning up unnecessary package files No path specified, will use booted path bootflash:packages.conf Cleaning bootflash: Scanning boot directory for packages ... done. Preparing packages list to delete ... asr1000rp1-espbase.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-117 OL-16506-10...
Page 180 Do you want to proceed? [confirm]y Deleting file bootflash:asr1000-rommon.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg ... done. Deleting file bootflash:asr1000-rommon.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.p kg ... done. Deleting file bootflash:asr1000rp1-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_010 0_1.bin ... done. Deleting file bootflash:asr1000rp1-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080 924_0100_1.bin ... done. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-118 OL-16506-10...
Page 181 Deleting file bootflash:packages.conf.05- ... done. SUCCESS: Files deleted. Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (request platform Command Set) This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router running subpackages using the request platform command set.
Page 182 Step 16, 17, 18 does not have to be performed immediately, and can be done at a convenient Note time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-120 OL-16506-10...
Page 183 It is recommended that you copy the package onto a usb: or harddisk: file system for space considerations when performing this step of the procedure. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-121 OL-16506-10...
Page 184 ISSU upgrade has been completed. target-URL Step 7 (Optional) Display the directory to confirm that the files were extracted. Example: Router# dir usb0:221subs Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-122 OL-16506-10...
Page 185 :asr1000rp1-{rpaccess,rpios,rpcontrol version-string standby-bay *.pkg bay force Example: Router# request platform software package install rp 0 file bootflash:asr1000rp1-{rpaccess,rpios,rpcontrol} *02.02.01.122-33.XNB1*.pkg bay 1 force Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-123 OL-16506-10...
Page 186 See the “ISSU Procedures (Prior to Cisco IOS XE 122-33.XNB1*.pkg slot 2 force Release 2.1.2)” section on page 4-73 for pre-Cisco IOS XE Release 2.1.2 ISSU upgrade procedures. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-124 OL-16506-10...
Page 187 (Optional) Removes the unused subpackages from the request platform software package clean router. Examples The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running sub-packages: Router# show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1)
Page 188 Created dir bootflash:221subs Router(config)# ip tftp source-interface gigabitethernet 0 Router# copy tftp: usb0:221subs Address or name of remote host []? 172.17.16.81 Source filename []? /auto/users/asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin Destination filename [asr1000rp1-adventerprisek9.02.02.01.122-33.XNB1.bin]? Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-126 OL-16506-10...
Page 189 928862208 bytes total (466358272 bytes free) Router# copy usb0:221subs/asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-espbase.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC 51904716 bytes copied in 5.478 secs (9475122 bytes/sec) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-127 OL-16506-10...
Page 190 CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCC 36442316 bytes copied in 3.906 secs (9329830 bytes/sec) Router# copy usb0:221subs/asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg bootflash: Destination filename [asr1000rp1-sipspa.02.02.01.122-33.XNB1.pkg]? Copy in progress...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-128 OL-16506-10...
Page 191 Updating provisioning rollback files Creating pending provisioning file Committing provisioning file Finished commit of software changes --- Starting analysis of software changes --- Finished analysis of software changes Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-129 OL-16506-10...
Page 192 *Sep 25 11:31:33.401: %NETCLK-5-NETCLK_MODE_CHANGE: Network clock source not available. The network clock has changed to freerun *Sep 25 11:31:33.438: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_NOT_PRESENT) *Sep 25 11:31:33.438: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-130 OL-16506-10...
Page 193 Insert time (ago) --------- ------------------- --------------------- ----------------- ASR1000-SIP10 00:31:12 SPA-1XOC12-POS 00:11:35 SPA-2XOC3-POS 00:11:35 SPA-5X1GE-V2 00:11:35 ASR1000-RP1 00:31:12 R0/0 ok, standby 00:05:38 R0/1 ok, active 00:13:36 ASR1000-ESP10 ok, active 00:31:12 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-131 OL-16506-10...
Page 194 *Sep 25 11:39:35.632: %ACE-3-INITFAIL: ASR1000-ESP(14): initialization failed (timed out)Finished commit of software changes --- Starting analysis of software changes --- Finished analysis of software changes --- Starting update running software --- Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-132 OL-16506-10...
Page 195 Locating image files and validating name syntax Inspecting image file types Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-133 OL-16506-10...
Page 196 Restarting SIP0 Applying final IPC and database definitions *Sep 29 10:11:16.631: %ASR1000_OIR-6-OFFLINECARD: Card (cc) offline in slot 0 *Sep 29 10:11:16.632: %ASR1000_OIR-6-REMSPA: SPA removed from subslot 0/0, interfaces disabled Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-134 OL-16506-10...
Page 197 Constructing working set for running package set Checking command output Constructing merge of running and candidate packages Finished candidate package set construction --- Starting compatibility testing --- Determining whether candidate package set is compatible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-135 OL-16506-10...
Page 198 Inspecting image file types Processing image file constraints Creating candidate provisioning file Finished image file verification --- Starting candidate package set construction --- Verifying existing software set Processing candidate provisioning file Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-136 OL-16506-10...
Page 199 *Sep 25 12:43:27.892: %ASR1000_OIR-6-OFFLINECARD: Card (fp) offline in slot F0 *Sep 25 12:43:29.992: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: F0:0 is pre-release hardware Generating software version information Notifying running software of updates Unblocking peer synchronization of operating information Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-137 OL-16506-10...
Page 200 --- Starting compatibility testing --- Determining whether candidate package set is compatible Determining whether installation is valid Determining whether installation is valid ... skipped Checking IPC compatibility for candidate software Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-138 OL-16506-10...
Page 201 File is in use, will not delete. packages.conf File is in use, will not delete. done. Files that will be deleted: asr1000-rommon.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000-rommon.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1.pkg asr1000rp1-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.bin asr1000rp1-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_20080924_0100_1 .bin asr1000rp1-espbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100 _1.conf asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LATEST_200809 24_0100_1.conf asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg asr1000rp1-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-139 OL-16506-10...
Page 202 Deleting file bootflash:packages.conf.01- ... done. Deleting file bootflash:packages.conf.02- ... done. Deleting file bootflash:packages.conf.03- ... done. Deleting file bootflash:packages.conf.04- ... done. Deleting file bootflash:packages.conf.05- ... done. SUCCESS: Files deleted. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 4-140 OL-16506-10...
Page 203: High Availability Overview
Cisco High Availability (HA) enables network-wide protection by providing fast recovery from faults that may occur in any part of the network. With Cisco High Availability, network hardware and software work together and enable rapid recovery from disruptions to ensure fault transparency to users and network applications.
Page 204: Chapter 5 High Availability Overview
Shared port adapters (SPAs)—A SPA must be reloaded, which will briefly interrupt traffic to that SPA, for a SPA software subpackage update to complete. Hardware redundancy on the Cisco ASR 1000 Series Routers gives users the following benefits: • A failover option—If a processor fails, the standby processor immediately becomes the active processor with little or no delay.
Page 205: Software Redundancy On The Cisco Asr 1000 Series Routers
SSO-Aware Protocol and Applications, page 5-6 Software Redundancy Overview On the Cisco ASR 1000 Series Routers, IOS runs as one of many processes within the operating system. This is different than on traditional Cisco IOS, where all processes are run within Cisco IOS. See the “IOS as a Process”...
Page 206: Software Redundancy On The Cisco Asr 1000 Series Routers
IOS process can only run on the standby Route Processor. 1. If a critical process, such as the ESP or the SIP fails on the Cisco ASR 1001 Router, then the entire chassis reloads. Second IOS Process on a Cisco ASR 1002 or 1004 Router For Cisco ASR 1002 and 1004 routers, Route Processor Redundancy and Stateful Switchover can be used to switch between IOS processes.
Page 207: Route Processor Redundancy
High Availability switchover features such as Nonstop Forwarding/Stateful Switchover (NSF/SSO). On the Cisco ASR 1000 Series Router, RPR can also be used to enable a second IOS process on a single RP for a Cisco ASR 1002 or 1004 Router. See the “Second IOS Process on a Cisco ASR 1002 or 1004...
Page 208: Stateful Switchover
For more information on BFD, see the Bidirectional Forwarding Detection document. For the Cisco ASR 1000 Series Routers, BFD for IPv4 Static Routes and BFD for BGP are supported. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 209: Ppp Sessions And L2Tp Tunnel Scaling
The infrastructure of a service provider must be capable of supporting the services that an enterprise customer or Internet service provider (ISP) wants to offer its subscribers. The service provider must also be able to scale up to an expanding subscriber base. You can configure the Cisco ASR1000 Series Routers for high broadband scalability.
Page 210: C H A P T E R 6 Broadband Scalability And Performance
If any of the listed restrictions is not met, the router scales to a maximum of 16000 L2TP tunnels. The RP2 and ESP10 hardware combination is not supported for broadband. • RP1 with 2GB of DRAM is not recommended for broadband deployment. • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 211: Ip Sessions Scaling
Configuring the Cisco ASR 1000 Series Router for High Scalability The Cisco ASR 1000 Series Routers provide powerful performance and scalability for embedded services. To achieve maximum scaling on the 1001, 1002, and 1004 chassis, IOS software redundancy must be disabled.
Page 212: Configuring Call Admission Control
The Control Plane Policing feature allows you to configure a QoS filter that manages the traffic flow of control plane packets to protect the control plane of Cisco IOS XE routers and switches against reconnaissance and denial-of-service (DoS) attacks. The control plane thus helps maintain packet forwarding and protocol states despite an attack or heavy traffic load on the router or switch.
Page 213: Vpdn Group Session Limiting
Chapter 6 Broadband Scalability and Performance Configuring the Cisco ASR 1000 Series Router for High Scalability For examples about configuring the Control Plane Policing feature, see the “Control Plane Policing” section in the Quality of Service Solutions Configuration Guide located at: http://www.cisco.com/en/US/docs/ios/ios_xe/qos/configuration/guide/ctrl_plane_policng_xe_ps11174...
Page 214: Configuring The Keepalive Command
Using the cisco-avpair="lcp:interface-config" RADIUS Attribute When you use the lcp:interface-config RADIUS attribute to reconfigure the virtual access subscriber interface, scaling decreases on the Cisco ASR 1000 Series Router for the following reasons: The lcp:interface-config command syntax includes an IOS interface configuration command. This •...
Page 215: Enhancing The Scalability Of Per-User Configurations
You should specify only one ip:vrf-id and one ip:ip-unnumbered value in a user profile. However, if the profile configuration includes multiple values, the Cisco ASR 1000 Series Router applies the value of the last VSA received, and creates a virtual access subinterface. If the profile includes the lcp:interface-config VSA, the router always applies the value of the lcp:interface-config VSA.
Page 216: Setting The Vrf And Ip Unnumbered Interface Configurations In Virtual Interface Templates
This situation is especially true when the Cisco ASR 1000 Series Router attempts to apply a large number of per-user profiles that include the lcp:interface-config VSA. Therefore, when updating your user profiles, we recommend that you redefine the lcp:interface-config VSA to the scalable ip:vrf-id and ip:ip-unnumbered VSAs.
Page 217: Information About Call Home
Network Operations Center, XML delivery to a support website, and utilization of Cisco Smart Call Home services for direct case generation with the Cisco Systems Technical Assistance Center (TAC). This document describes how to configure the Call Home feature on Cisco ASR 1000 Series Aggregation Services Routers beginning with Cisco IOS XE Release 2.6.
Page 218: Chapter 7 Configuring Call Home
CiscoTAC-1 profile is used to send alerts to the backend server of the Smart Call Home service, which can be used to create service requests to the Cisco TAC (depending on the Smart Call Home service support in place for your device and the severity of the alert).
Page 219: Prerequisites For Call Home
Configure a trustpoint certificate authority (CA) if using secure HTTP (HTTPS) message delivery. • For example, this procedure is required if you are using the HTTPS server for Cisco Smart Call Home Service in the CiscoTAC-1 profile for Call Home.
Page 220: Configuring The Management Interface Vrf
How to Configure Call Home Configuring the Management Interface VRF The Call Home feature on the Cisco ASR 1000 Series Routers requires use of the Gigabit Ethernet Management interface virtual routing and forwarding (VRF) instance. The Gigabit Ethernet Management interface is automatically part of its own VRF named “Mgmt-intf.”...
Page 221: Configuring A Destination Profile
XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed. If you use the Cisco Smart Call Home service, the destination profile must use the XML message format.
Page 222 100 (lowest priority). Example: The following example shows the configuration of a primary mail server (named “smtp.example.com”) and secondary mail server at IP address 192.168.0.1: Router# configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 223 To configure a destination profile for e-mail transport, complete the following steps: SUMMARY STEPS configure terminal call-home profile name destination transport-method email destination address email email-address destination preferred-msg-format {long-text | short-text | xml} Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 224 3145728 bytes. Example: Router(cfg-call-home-profile)# destination message-size 3145728 Step 8 (Optional) Enables the destination profile. By default, a active user-defined profile is enabled when it is created. Example: Router(cfg-call-home-profile)# active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 225 Router(cfg-call-home)# sender from username@example.com Step 4 (Optional) Assigns the e-mail address that will appear in the sender reply-to email-address reply-to field in Call Home e-mail messages. Example: Router(cfg-call-home)# sender reply-to username@example.com Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 226: Configuring A Destination Profile To Send Http Messages
To configure a destination profile for http transport, complete the following steps: SUMMARY STEPS configure terminal call-home profile name destination transport-method http destination address http url destination preferred-msg-format {long-text | short-text | xml} Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-10 OL-16506-10...
Page 227 Example: Router(cfg-call-home-profile)# destination message-size 3,145,728 Step 8 Enables the destination profile. By default, a profile is active enabled when it is created. Example: Router(cfg-call-home-profile)# active Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-11 OL-16506-10...
Page 228: Working With Destination Profiles
7-28. That section describes how to configure a CA trustpoint for a secure Cisco server to use with the Smart Call Home service, but can be applied to other secure server configuration as needed by your site using the required certificate for your secure server.
Page 229 Copying a Destination Profile To create a new destination profile by copying an existing profile, complete the following steps: SUMMARY STEPS configure terminal call-home copy profile source-profile target-profile Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-13 OL-16506-10...
Page 230 Renames an existing source file, where: rename profile source-profile target-profile • source-profile—Specifies the existing name of the profile. Example: Router(cfg-call-home)# rename profile2 • target-profile—Specifies a new name for the existing testprofile profile. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-14 OL-16506-10...
Page 231: Subscribing To Alert Groups
By default, the CiscoTAC-1 profile is inactive and uses email as the default transport method. To use email transport, you only need to enable the profile. However, to use this profile with the Cisco Smart Call Home service secure server (via HTTPS), you not only must enable the profile, but you must also...
Page 232: Periodic Notification
If the pattern contains spaces, you must enclose it within double quotation marks(“ ”) when configuring it. You can specify up to five patterns for each destination profile. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-16 OL-16506-10...
Page 233 Example: Router(cfg-call-home)# alert-group all Step 4 Enters call home destination profile configuration profile name mode for the specified destination profile. Example: Router(cfg-call-home)# profile profile1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-17 OL-16506-10...
Page 234 If the pattern contains spaces, you must Example: enclose it within double quotation marks (“ ”). Router(cfg-call-home-profile)# subscribe-to-alert-group syslog Step 11 Exits call home destination profile configuration exit mode. Example: Router(cfg-call-home-profile)# exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-18 OL-16506-10...
Page 235: Configuring Contact Information
RMA equipment can be shipped. Enter up to 200 characters. If you include spaces, you must enclose your entry within Example: double quotation marks (“ ”). Router(cfg-call-home)# street-address “1234 Any Street, Any city, Any state, 12345” Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-19 OL-16506-10...
Page 236: Example
The Call Home feature defaults to a maximum of 20 messages per minute. If you want to change that value, complete the following steps: SUMMARY STEPS configure terminal call-home rate-limit number Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-20 OL-16506-10...
Page 237: Enabling And Disabling Call Home
Step 2 Enables the Call Home feature. service call-home Example: Router(config)# service call-home Step 3 Disables the Call Home feature. no service call-home Example: Router(config)# no service call-home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-21 OL-16506-10...
Page 238: Sending Call Home Communications Manually
Sending Call Home Alert Group Messages Manually, page 7-22 • Submitting Call Home Analysis and Report Requests, page 7-23 Sending the Output of a Command to Cisco or an E-Mail Address, page 7-24t • Sending a Call Home Test Message Manually You can use the call-home test command to send a user-defined Call Home test message.
Page 239: Submitting Call Home Analysis And Report Requests
If a profile name is specified, the request is sent to the profile. If no profile is specified, the request • is sent to the Cisco TAC profile. The recipient profile does not need to be enabled for the call-home request. The profile should specify the e-mail address where the transport gateway is configured so that the request message can be forwarded to the Cisco TAC and the user can receive the reply from the Smart Call Home service.
Page 240: Sending The Output Of A Command To Cisco Or An E-Mail Address
Cisco TAC (attach@cisco.com). The e-mail is sent in long text format with the service number, if specified, in the subject line. The service number is required only if no e-mail address is specified, or if a Cisco TAC e-mail •...
Page 241: How To Configure Call Home To Support The Smart Call Home Service
Service This section provides an overview of the minimum steps required to configure the Call Home feature on a Cisco device, and other required supporting configuration to communicate securely with the Smart Call Home service using HTTPS: Prerequisites, page 7-25 (required) •...
Page 242: Configure And Enable Call Home
The CiscoTAC-1 profile is predefined in the Call Home feature to communicate using email to the backend server for the Smart Call Home service. The URL to the Cisco HTTPS backend server is also predefined. This profile is inactive by default.
Page 243 Exits call home configuration mode and returns to global exit configuration mode. Example: Router(cfg-call-home)# exit Step 9 Enables the Call Home feature. service call-home Example: Router(config)# service call-home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-27 OL-16506-10...
Page 244: Declare And Authenticate A Ca Trustpoint
Example: Router# copy running-config startup-config Declare and Authenticate a CA Trustpoint To establish communication with the Cisco HTTPS server for Smart Call Home service, you must declare and authenticate the Cisco server security certificate. SUMMARY STEPS configure terminal...
Page 245: Examples
Saves the configuration to NVRAM. copy running-config startup-config Example: Router# copy running-config startup-config Examples The following example shows the configuration for declaring and authenticating the Cisco server security certificate: Router# configure terminal Router(config)# crypto pki trustpoint cisco Router(ca-trustpoint)# enrollment terminal...
Page 246: Start Smart Call Home Registration
CiscoTAC-1 What To Do Next To receive an email from Cisco Systems and follow the instructions to complete the device registration in the Smart Call Home web application: Launch the Smart Call Home web application at the following URL: •...
Page 247: Displaying Call Home Configuration Information
Example: Router# show call-home alert-group Step 4 Checks and displays the availability of the configured show call-home mail-server status e-mail server(s). Example: Router# show call-home mail-server status Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-31 OL-16506-10...
Page 248: Examples
Router# show call-home detail Current call home settings: call home feature : disable call home message's from address: username@example.com call home message's reply-to address: username@example.com vrf for call-home messages: Mgmt-intf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-32 OL-16506-10...
Page 249 ------------ diagnostic minor environment minor inventory normal Syslog-Pattern Severity ------------------------ ------------ major Example: Available Call Home Alert Groups Router# show call-home alert-group Available alert groups: Keyword State Description Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-33 OL-16506-10...
Page 250 Alert-group Severity ------------------------ ------------ diagnostic minor environment minor inventory normal Syslog-Pattern Severity ------------------------ ------------ major Router# Example: Information About a User-Defined Destination Profile Router# show call-home profile campus-noc Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-34 OL-16506-10...
Page 251 Inventory SysLog Test Request Send-CLI Total Failed Config Diagnostic Environment 0 Inventory SysLog Test Request Send-CLI Total Ratelimit -dropped Config Diagnostic Environment 0 Inventory SysLog Test Request Send-CLI Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-35 OL-16506-10...
Page 252: Default Settings
Destination message size for a message sent in long text, short text, or XML format 3,145,728 Alert group status Enabled Call Home message severity threshold 0 (debugging) Message rate limit for messages per minute Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-36 OL-16506-10...
Page 253: Alert Group Trigger Events And Commands
— Events related to power, fan, and environment sensing elements, such as temperature alarms. (Sent to TAC.) CLI commands executed: show platform show environment show inventory show logging Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-37 OL-16506-10...
Page 254 SPA inserted in subslot (slot/subslot HARDWARE_I number). NSERTION — CC/FP/RP %ASR1000_OIR-6-REMCARD Card (cc/rp/fp) removed from slot HARDWARE_ (slot number). REMOVAL — CC/FP/RP %ASR1000_OIR-6-INSCARD Card (cc/rp/fp) inserted in slot (slot HARDWARE_I number). NSERTION Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-38 OL-16506-10...
Page 255: Message Contents
This section also includes the following subsections that provide sample messages: Sample Syslog Alert Notification in Long Text Format, page 7-43 • Sample Syslog Alert Notification in XML Format, page 7-47 • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-39 OL-16506-10...
Page 256 ID by any support service. ContractData/ContractId Site ID Optional user-configurable field used for site IDs supplied CallHome/CustomerData/ by Cisco Systems or other data meaningful to alternate ContractData/SiteId support services. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-40 OL-16506-10...
Page 257 The following fields may be repeated if multiple CLI commands are executed for this alert group. Command output The exact name of the issued CLI command. /aml/Attachments/Attachment/Name name Attachment type Attachment type. Usually “inline”. /aml/Attachments/Attachment@type Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-41 OL-16506-10...
Page 258 Top-level software version. CallHome/Device/Cisco_Chassis/ software version AdditionalInformation/AD@name= “SoftwareVersion” FRU name Name of the affected FRU generating the event message. CallHome/Device/Cisco_Chassis/ Cisco_Card/Model FRU s/n Serial number of FRU. CallHome/Device/Cisco_Chassis/ Cisco_Card/SerialNumber Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-42 OL-16506-10...
Page 259: Sample Syslog Alert Notification In Long Text Format
No Active Message Discriminator. No Inactive Message Discriminator. Console logging: disabled Monitor logging: level debugging, 0 messages logged, xml disabled, filtering disabled Buffer logging: level debugging, 112 messages logged, xml disabled, Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-43 OL-16506-10...
Page 260 3 07:16:35.134: %IOSXE-6-PLATFORM: F0: cpp_cp: Process CPP_PFILTER_EA_EVENT__API_CALL__REGISTER *Dec 3 07:16:38.965: %CMRP-6-FP_HA_STATUS: R0/0: cmand: F0 redundancy state is Active with ready Standby *Dec 3 07:17:01.926: %DYNCMD-7-PKGINT_INSTALLED: The command package 'platform_trace' has been succesfully installed Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-44 OL-16506-10...
Page 261 3 12:17:13.754 IST: %LINK-3-UPDOWN: Interface POS0/2/3, changed state to down *Dec 3 12:17:13.754 IST: %LINK-3-UPDOWN: Interface POS0/2/4, changed state to down *Dec 3 12:17:13.754 IST: %LINK-3-UPDOWN: Interface POS0/2/5, changed state to down Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-45 OL-16506-10...
Page 262 Command Output Name : show inventory Attachment Type : command output MIME Type : text/plain Command Output Text : NAME: "Chassis", DESCR: "Cisco ASR1006 Chassis" PID: ASR1006 , VID: V00, SN: FOX105101DH NAME: "module 0", DESCR: "Cisco ASR1000 SPA Interface Processor 10"...
Page 263: Sample Syslog Alert Notification In Xml Format
NAME: "module F1", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps" PID: ASR1000-ESP10 , VID: V00, SN: JAB111101AP NAME: "Power Supply Module 0", DESCR: "Cisco ASR1006 AC Power Supply" PID: TBD000000000000000, VID: +^A , SN: ART1114Q00F NAME: "Fan Module 1", DESCR: "Cisco ASR1006 Fan Module"...
Page 264 <rme:AD name="SystemDescription" value="Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Experimental Version 12.2(20091118:075558) [v122_33_xnf_asr_rls6_throttle-mcp_dev_rls6 102] Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Wed 18-Nov-09 01:14 by " /> </rme:AdditionalInformation> </rme:Chassis> </ch:Device> </ch:CallHome> Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-48 OL-16506-10...
Page 265 Success. *Dec 3 07:16:27.669: %CPPHA-7-START: F1: cpp_ha: CPP 0 preparing image /tmp/sw/fp/1/0/fp/mount/usr/cpp/bin/cpp-mcplo-ucode *Dec 3 07:16:27.839: %CPPHA-7-START: F1: cpp_ha: CPP 0 startup init image /tmp/sw/fp/1/0/fp/mount/usr/cpp/bin/cpp-mcplo-ucode Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-49 OL-16506-10...
Page 266 3 12:17:07.476 IST: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up *Dec 3 12:17:08.137 IST: %SPA_OIR-6-ONLINECARD: SPA (SPA-4XOC3-POS) online in subslot 1/3 *Dec 3 12:17:08.139 IST: %SPA_OIR-6-ONLINECARD: SPA (SPA-8XOC3-POS) online in subslot 0/2 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-50 OL-16506-10...
Page 267 3 12:17:16.488 IST: %LINK-3-UPDOWN: SIP1/3: Interface POS1/3/0, changed state to up *Dec 3 12:17:17.868 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface POS1/3/0, changed state to up *Dec 3 12:17:16.199 IST: %LINK-3-UPDOWN: SIP2/3: Interface POS2/3/0, changed state to up Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-51 OL-16506-10...
Page 268 NAME: "module F1", DESCR: "Cisco ASR1000 Embedded Services Processor, 10Gbps" PID: ASR1000-ESP10 , VID: V00, SN: JAB111101AP NAME: "Power Supply Module 0", DESCR: "Cisco ASR1006 AC Power Supply" PID: TBD000000000000000, VID: +^A , SN: ART1114Q00F NAME: "Fan Module 1", DESCR: "Cisco ASR1006 Fan Module"...
Page 269: Additional References
Cisco devices and offers higher network availability, and increased operational efficiency by providing proactive diagnostics and real-time alerts. Smart Call Home site page on Cisco.com for access to all http://www.cisco.com/go/smartcall/ related product information. Public Key Infrastructure (PKI) and Certificate Authority...
Page 270: Mibs
Note Table 7-8 lists only the Cisco IOS XE software release that introduced support for a given feature in a given Cisco IOS XE software release train. Unless noted otherwise, subsequent releases of that Cisco IOS XE software release train also support that feature.
Page 271 XML-based automated parsing applications. In Cisco IOS XE Release 2.6, support for this feature was added for the Cisco ASR 1000 Series Aggregation Services Routers. The following commands are new or modified: show diagnostic commands.
Page 272 Chapter 7 Configuring Call Home Feature Information for Call Home Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 7-56 OL-16506-10...
Page 273: Console Port Overview For The Cisco Asr 1000 Series Routers
Console Port Overview for the Cisco ASR 1000 Series Routers The console port on the Cisco ASR 1000 Series Router is an EIA/TIA-232 asynchronous, serial connection with no flow control and an RJ-45 connector. The console port is used to access the router and is located on the front panel of the Route Processor (RP).
Page 274: Telnet And Ssh Overview For The Cisco Asr 1000 Series Routers
Persistent Telnet and Persistent SSH Overview In traditional Cisco routers, accessing the router using Telnet or SSH is not possible in the event of an IOS failure. When Cisco IOS fails on a traditional Cisco router, the only method of accessing the router is through the console port.
Page 275: Chapter 8 Console Port, Telnet, And Ssh Handling
Console Port, Telnet, and SSH Handling Configuring a Console Port Transport Map Configuring a Console Port Transport Map This task describes how to configure a transport map for a console port interface on the Cisco ASR 1000 Series Router. SUMMARY STEPS...
Page 276: Examples
Welcome to diagnostic mode Router(config-tmap)# banner wait X Enter TEXT message. End with the character 'X'. Waiting for IOS vty line Router(config-tmap)# exit Router(config)# transport type console 0 input consolehandler Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 277: Configuring Persistent Telnet
This task describes how to configure persistent Telnet on the Cisco ASR 1000 Series Routers. Prerequisites For a persistent Telnet connection to access an IOS vty line on the Cisco ASR 1000 Series Router, local login authentication must be configured for the vty line (the login command in line configuration mode).
Page 278 Ethernet interface on the Cisco ASR 1000 Series Routers. Router(config-tmap)# transport interface gigabitethernet 0 This step must be taken before applying the transport map to the Management Ethernet interface. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 279: Examples
Router(config-tmap)# banner wait X Enter TEXT message. End with the character 'X'. --Waiting for IOS Process-- Router(config-tmap)# transport interface gigabitethernet 0 Router(config-tmap)# exit Router(config)# transport type persistent telnet input telnethandler Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 280: Configuring Persistent Ssh
Chapter 8 Console Port, Telnet, and SSH Handling Configuring Persistent SSH Configuring Persistent SSH This task describes how to configure persistent SSH on the Cisco ASR 1000 Series Routers. SUMMARY STEPS (Required) enable (Required) configure terminal (Required) transport-map type persistent ssh transport-map-name...
Page 281 • Router(config-tmap)# for the vty line to become active. banner-message—The banner message, which begins • and ends with the same delimiting character. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 282: Examples
The transport map is then applied to the interface when the transport type persistent ssh input command is entered to enable persistent SSH: Router(config)# transport-map type persistent ssh sshhandler Router(config-tmap)# connection wait allow interruptible Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-10 OL-16506-10...
Page 283: Viewing Console Port, Ssh, And Telnet Handling Configurations
Transport Map: Name: sshhandler Type: Persistent SSH Transport Interface: GigabitEthernet0 Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for IOS prompt Bshell banner: Welcome to Diagnostic Mode SSH: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-11 OL-16506-10...
Page 284 Transport Map: Name: sshhandler Type: Persistent SSH Transport Interface: GigabitEthernet0 Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for IOS prompt Bshell banner: Welcome to Diagnostic Mode Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-12 OL-16506-10...
Page 285 Welcome to Diagnostic Mode Router# show transport-map name consolehandler Transport Map: Name: consolehandler Type: Console Transport Connection: Wait option: Wait Allow Interruptable Wait banner: Waiting for the IOS CLI Bshell banner: Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-13 OL-16506-10...
Page 286 SSH configuration are illustrated in the output. Router# show platform software configuration access policy Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-14 OL-16506-10...
Page 287 Wait banner : Waiting for IOS process Method : ssh Rule : wait with interrupt Shell banner: Welcome to Diag Mode Wait banner : Waiting for IOS Method : console Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-15 OL-16506-10...
Page 288: Important Notes And Restrictions
Configuring the diagnostic and wait banners is optional but recommended. The banners are • especially useful as indicators to users of the status of their Telnet or SSH attempts. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 8-16 OL-16506-10...
Page 289: Gigabit Ethernet Management Interface Overview
• Gigabit Ethernet Management Interface Overview The Cisco ASR 1000 Series Routers have one Gigabit Ethernet Management Ethernet interface on each Route Processor. The purpose of this interface is to allow users to perform management tasks on the router; it is basically an interface that should not and often cannot forward network traffic but can otherwise access the router, often via Telnet and SSH, and perform most management tasks on the router.
Page 290: C H A P T E R 9 Using The Management Ethernet Interface
In a dual RP configuration, the Management Ethernet interface on the active RP will always be Gigabit Ethernet 0, while the Management Ethernet interface on the standby RP will not be accessible using the Cisco IOS CLI in the same telnet session. The standby RP can be telnetted to through the console port, however.
Page 291: Common Ethernet Management Tasks
Management Ethernet interface. This section documents tasks that might be common or slightly tricky on the Cisco ASR 1000 Series Routers. It is not intended as a comprehensive list of all tasks that can be done using the Management Ethernet interface.
Page 292: Viewing Detailed Vrf Information For The Management Ethernet Vrf
Below are two simple examples of configuring an IPv4 adress and an IPv6 address on the Management Ethernet interface. IPv4 Example Router(config)# interface GigabitEthernet 0 Router(config-if)# ip address A.B.C.D A.B.C.D IPv6 Example Router(config)# interface GigabitEthernet 0 Router(config-if)# ipv6 address X:X:X:X::X Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 293: Telnetting Over The Management Ethernet Interface
Management Ethernet interface, enter the ntp server vrf Mgmt-intf command and specify the IP address of the device providing the update. The following CLI provides an example of this procedure. Router(config)# ntp server vrf Mgmt-intf 172.17.1.1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 294: Syslog Server
RADIUS Server Group Configuration Router(config)# aaa group server radius hello Router(config-sg-radius)# ip vrf forwarding Mgmt-intf TACACS+ Server Group Example outer(config)# aaa group server tacacs+ hello Router(config-sg-tacacs+)# ip vrf forwarding Mgmt-intf Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 295: Vty Lines With Acl
To ensure an access control list (ACL) is attached to vty lines that are and are not using VRF, use the vrf-also option when attaching the ACL to the vty lines. Router(config)# line vty 0 4 Router(config-line)# access-class 90 in vrf-also Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 296 Chapter 9 Using the Management Ethernet Interface Common Ethernet Management Tasks Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 297: Synchronous Ethernet Overview
Primary Reference Clock (PRC). Cisco ASR 1000 Series Routers have a dedicated external interface known as BITs interface to recover clock from a Synchronization Supply Unit (SSU). ASR 1000 router uses this clock for SyncE. The BITS interface supports E1(European SSUs) and T1 (American BITS) framing.
Page 298: C H A P T E R 10 Synchronous Ethernet Support
SSU. Squelching is performed only on external devices such as SSU or PRC. You can have a maximum of six clock sources for a Cisco ASR 1000 Series Router. The clock source with highest priority is made the default clock source. You can manage the clock sources by changing the priority of the clock sources.
Page 299: Synchronization Status Message
For multiple inputs having the same highest priority and QL, the existing reference is maintained (if it belongs to highest priority and QL group). Otherwise, an arbitrary reference from highest priority and QL group is selected. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-3 OL-16506-10...
Page 300: Restrictions And Usage Guidelines
• its Ethernet interfaces. You cannot change the synchronous mode on a per interface basis. You can configure a maximum of eight ports as a clock source for a Cisco ASR 1000 Router. • The SyncE feature is SSO-coexistent, but not SSO-compliant. The clock selection algorithm is •...
Page 301: Configuring Clock Recovery From Synce
Chapter 10 Synchronous Ethernet Support Configuring Synchronous Ethernet Configuring Clock Recovery from SyncE This section describes how to configure clock recovery on Cisco ASR 1000 Series Router from SyncE method. SUMMARY STEPS enable configure terminal network-clock synchronization automatic network-clock synchronization ssm option option_Id Generation_Id...
Page 302 Router(config)# network-clock synchronization automatic Router(config)# network-clock synchronization ssm option 2 GEN1 Router(config)# int gig 0/0/0 Router(config-if)# synchronous mode Router(config)# exit Router(config)# network-clock input-source 1 interface GigabitEthernet0/0/0 Router(config)# exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-6 OL-16506-10...
Page 303: Configuring Clock Recovery From A Bits Port
Europe. This is the default value. The option_id value 2 refers to the synchronization networks design for the U.S. Example: Router(config)# network-clock synchronization ssm option 2 GEN1 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-7 OL-16506-10...
Page 304 Example: Router(config-if-srv)# network-clock input-source 1 External 5/3/0 t1 esf Router(config)# network-clock input-source 1 External R0 t1 esf Step 6 Exits the global configuration mode. exit Example: Router(config)# exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-8 OL-16506-10...
Page 305: Configuring A Synce Using The Line-To-External Method
Step 1 Enables the privileged EXEC mode. enable Enter your password if prompted. Example: Router# enable Step 2 Enters the global configuration mode. configure terminal Example: Router# configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-9 OL-16506-10...
Page 306 Configures the line clock to be used on external Tx network-clock output-source line priority {interface interface_name} interfaces. {external slot/card/port} Example: Router(config-if-srv)# encapsulation dot1q 40 second-dot1q 42 Step 9 Exits the global configuration mode. exit Example: Router(config)# exit Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-10 OL-16506-10...
Page 307: Managing Synchronization On The Cisco Asr 1000 Series Router
Router(config)# network-clock output-source line 1 interface GigabitEthernet0/0/0 External 0/0/0 Router(config)# exit Managing Synchronization on the Cisco ASR 1000 Series Router Manage synchronization on a Cisco ASR 1000 Series Router using the following management commands: Quality-Level-Enabled Clock Selection: Use the network-clock synchronization mode •...
Page 308 Router# network-clock set lockout interface GigabitEthernet 0/0/0 The following example shows how to clear the lock out on a clock source: Router# network-clock clear lockout interface GigabitEthernet 0/0/0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-12 OL-16506-10...
Page 309: Verifying The Synce Configuration
T0 : External R0 t1 esf Hold-off (global) : 300 ms Wait-to-restore (global) : 300 sec Tsm Delay : 180 ms Revertive : No Force Switch: FALSE Manual Switch: FALSE Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-13 OL-16506-10...
Page 310 SSM Tx: Disable SSM Rx: Enable Priority: 2 QL Receive: QL-STU QL Receive Configured: - QL Receive Overrided: - QL Transmit: - QL Transmit Configured: - Hold-off: 300 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-14 OL-16506-10...
Page 311 ESMC Information rate: 1 packet/second ESMC Expiry: 5 second ESMC Tx Timer: Running ESMC Rx Timer: Running ESMC Tx interval count: 1 ESMC INFO pkts in: 0 ESMC INFO pkts out: 256 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-15 OL-16506-10...
Page 312: Troubleshooting The Synce Configuration
(this is specific to SIP-400). Alarms Reproduce the issue using the debug platform network-clock • command enabled in the RP. Alternatively, enable the debug network-clock event and debug network-clock errors commands. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-16 OL-16506-10...
Page 313 (src_rem)-> 1A (src_added)-> 1A (ql_change)-> 1A (sf_change)-> 1A (force_sw)-> 1C (clear_sw)-> 1A (sf_change)-> 1A (sf_change)-> 1A Revertive : Yes<<<<If it is non revertive then it will show NO here. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-17 OL-16506-10...
Page 314 RP commands or enable the debug hw-module subslot command. (This is specific to SIP-400). We suggest you do not use these debug commands Warning without TAC supervision. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 10-18 OL-16506-10...
Page 315: Restrictions For The Bridge Domain Interface
C H A P T E R Configuring Bridge Domain Interfaces The Cisco ASR 1000 Series Routers support the bridge domain interface feature for terminating Layer 2 Ethernet segments into Layer 3 IP. This chapter covers the following topics: Restrictions for the Bridge Domain Interface, page 11-1 •...
Page 316: C H A P T E R 11 Configuring Bridge Domain Interfaces
It embodies the different parameters on which the service is being offered. In the Cisco EVC Framework, the bridge domains are made up of one or more Layer 2 interfaces known as service instances. A service instance is the instantiation of an EVC on a given port on a given router.
Page 317: Support For Ip Forwarding
2 encapsulation and forwards the frame to the corresponding bridge domain. The byte counters are updated. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11-3 OL-16506-10...
Page 318: Link States Of A Bridge Domain And A Bridge Domain Interface
Creating or Deleting a Bridge Domain Interface When you define an interface or subinterface for a Cisco IOS router, you name it and specify how it is assigned an IP address.You can create a bridge domain interface before adding a bridge domain to the system, this new bridge domain interface will be activated after the associated bridge domain is configured.
Page 319: Bridge Domain Interface Scalability
Configuring a Bridge Domain Interface To configure a bridge domain interface, perform the following steps: SUMMARY STEPS configure terminal interface BDI interface number ip address ip-address mask mac-address {mac-address} no shut shut Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11-5 OL-16506-10...
Page 320 Step 1 Enters the global configuration mode. configure terminal Example: Router# configure terminal Step 2 Specifies the bridge domain interface on a Cisco ASR 1000 interface BDI{interface number} Series Router. Example: Router(config)# interface BDI3 Step 3 Specifies either the IPv4 or IPv6 address for the bridge ip address ip-address mask domain interface.
Page 321 Manager of the ESP processor in slot R0 is set to the informational tracing level (max): Router(config)# platform trace boottime slot R0 bay 1 process forwarding-manager forwarding-manager level max For additional information on the commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html.
Page 322 Chapter 11 Configuring Bridge Domain Interfaces Configuring a Bridge Domain Interface Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 11-8 OL-16506-10...
Page 323: Feature Overview
C H A P T E R Monitoring and Maintaining Multilink Frame Relay This document describes how to monitor and maintain the Multilink Frame Relay feature for the Cisco ASR 1000 Series Routers. It includes the following sections: • Feature Overview, page 12-1 Configuring Multilink Frame Relay, page 12-1 •...
Page 324: C H A P T E R 12 Monitoring And Maintaining Multilink Frame Relay
• Route Processor and Embedded Service Processor trace messages for the forwarding manager process. For additional information on the commands and the options available for each command, see the Cisco IOS Configuration Fundamentals Command Reference document, located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 325: Tracing Overview
Tracing is a function that logs internal events. Trace files are automatically created and saved to the tracelogs directory on the harddisk: file system on all Cisco ASR 1000 Series Routers except the Cisco ASR 1002 Router, which stores tracing files in bootflash:. Trace files are used to store tracing data.
Page 326: Chapter 13 Tracing And Trace Management
Chapter 13 Tracing and Trace Management Tracing cannot be disabled on the Cisco ASR 1000 Series Router. Trace levels, however, which set the message types that generate trace output, are user-configurable and can be set using the set platform software trace command. If a user wants to modify the trace level to increase or decrease the amount of trace message output, the user should set a new tracing level using the set platform software trace command.
Page 327: Viewing A Tracing Level
Viewing a Tracing Level By default, all modules on the Cisco ASR 1000 Series Routers are set to notice. This setting will be maintained unless changed by a user.
Page 328: Setting A Tracing Level
Setting a Tracing Level To set a tracing level for any module on the Cisco ASR 1000 Series Routers, or for all modules within a process on the Cisco ASR 1000 Series Router, enter the platform software trace privileged EXEC and diagnostic mode command.
Page 329: Viewing The Content Of The Trace Buffer
08/23 11:53:57.440 [uipeer]: (info): Going to send a status update to the shell manager in slot 0 08/23 11:53:47.417 [uipeer]: (info): Going to send a status update to the shell manager in slot 0 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13-5 OL-16506-10...
Page 330 Chapter 13 Tracing and Trace Management Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 13-6 OL-16506-10...
Page 331: Web User Interface Overview
Release 2.1.1. The web user interface is not available in Cisco IOS XE Release 2.1.0. The Cisco ASR 1000 Series Routers can be accessed using a web user interface. This web user interface allows users to monitor router performance using an easy-to-read graphical interface. Most aspects of a Cisco ASR 1000 Series Router can be monitored using the web user interface.
Page 332: C H A P T E R 14 Configuring And Accessing The Web User Interface
On the Cisco ASR 1000 Series Routers, this interface is part of the larger web user interface and can be accessed by clicking the “IOS Web UI” option in the left-hand menu.
Page 333: Graphics-Based Web User Interface Overview
Legacy Web User Interface Home Page Graphics-Based Web User Interface Overview The web user interface on the Cisco ASR 1000 Series Routers expands the legacy web user interface available on other platforms by presenting information in easy-to-read graphics-based tables, graphs, or charts, depending on the information presented.
Page 334: Persistent Web User Interface Transport Maps Overview
HTTP, HTTPS, or both protocols. Only one persistent web user interface transport map can be applied to a Cisco ASR 1000 Series Router at a time. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide...
Page 335: Configuring The Router For Web User Interface Access
14-5. Configuring the Router for Web User Interface Access The ability to access either web user interface on the Cisco ASR 1000 Series Routers is disabled by default. The legacy web user interface must be configured before the graphics-based web user interface can be enabled.
Page 336 In the following example, the web user interface using the default HTTP and HTTPS ports is enabled: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# ip http server Router(config)# ip http secure-server Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14-6 OL-16506-10...
Page 337: Authentication And The Web User Interface
. Your previous session has timed-out, or . You have been logged out from elsewhere, or . You have not yet logged in, or . The resource requires a higher privilege level login. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14-7 OL-16506-10...
Page 338: Accessing The Web User Interface
The graphics-based web user interface similar to Figure 14-2 in the “Graphics-Based Web User Interface Step 4 Overview” section on page 14-3 should appear in your web browser. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14-8 OL-16506-10...
Page 339: Using Auto Refresh
Chapter 14 Configuring and Accessing the Web User Interface Using Auto Refresh For additional information on the commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html. Using Auto Refresh The web user interface does not refresh content automatically by default.
Page 340: Web User Interface Tips And Tricks
This section provides some useful information about using the web user interface once the interface has been accessed: If you know a Cisco IOS command-line interface command to gather information that you are • unable to gather using the web user interface, you can click IOS Web UI followed by Monitor the Router to enter commands.
Page 341: Unsupported Commands
A P P E N D I X Unsupported Commands The Cisco ASR 1000 Series Routers contain a series of commands with the platform keyword that either produce no output or produce output that is not useful for customer purposes. Although some commands...
Page 342: Appendix A Unsupported Command
• debug platform software shell • debug platform software urpf • debug platform software vty • debug platform software wccp • • debug platform software zone Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 343 • show platform software mpls • show platform software multicast • show platform software nat • show platform software nbar • • show platform software netflow Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 344 • test platform software inject test platform software process • test platform software shell • test platform software tdl • test platform software trace • Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 345: Configuring The Router To Boot The Consolidated Package On The Tftp Server
This appendix is designed to provide examples of how some common networking tasks can be accomplished on the Cisco ASR 1000 Series Routers. The examples in this appendix are provided for illustrative purposes only; little or no context is given with these examples. See the other chapters in this book (in particular Chapter 3, “Consolidated Packages and SubPackages...
Page 346: Appendix B Configuration Example
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!. !!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! File reception completed. Boot image size = 208904396 (0xc73a0cc) bytes Using midplane macaddr Package header rev 0 structure detected Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 347 Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Thu 01-May-08 00:29 by mcpre Image text-base: 0x10064AF0, data-base: 0x137E0958 Cisco IOS-XE software, Copyright (c) 1986-2008 by Cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0.
Page 348 Configuration Examples Configuring the Router to Boot the Consolidated Package on the TFTP Server A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 349: Copying The Consolidated Package From The Tftp Server To The Router
Appendix B Configuration Examples Copying the Consolidated Package from the TFTP Server to the Router A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 350: Configuring The Router To Boot Using The Consolidated Package Stored On The Router
User Access Verification Username: user Password: Router>en Password: Router#show version Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 351: Extracting The Subpackages From A Consolidated Package Into The Same File System
If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 352 May 22 2008 11:26:28 -07:00 asr1000rp1-sipspa.02.01.00.122-33.XNA.pkg 57603 -rw- 6256 May 22 2008 11:26:28 -07:00 packages.conf -rw- 45977 Apr 9 2008 16:48:46 -07:00 target_support_output.tgz.tgz 928862208 bytes total (286662656 bytes free) Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 353: Extracting The Subpackages From A Consolidated Package Into A Different File System
May 7 2008 17:27:51 -07:00 .prst_sync 43970 -rw- 5740 May 27 2008 14:25:00 -07:00 asr1000rp1-packages-adventerprisek9.02.01.00.122-33.XNA.conf 43980 -rw- 20334796 May 27 2008 14:25:01 -07:00 asr1000rp1-rpaccess.02.01.00.122-33.XNA.pkg 43981 -rw- 22294732 May 27 2008 14:25:02 -07:00 asr1000rp1-rpbase.02.01.00.122-33.XNA.pkg Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide OL-16506-10...
Page 354: Configuring The Router To Boot Using The Subpackages
End with CNTL/Z. Router(config)# boot system bootflash:packages.conf Router(config)# config-reg 0x2102 Router(config)# exit Router# config t *May 29 22:47:57.433: %SYS-5-CONFIG_I: Configured from console by user Router# show running-config | include boot Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-10 OL-16506-10...
Page 355 (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-11 OL-16506-10...
Page 356 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 357 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 358: Backing Up Configuration Files
255497216 bytes total (40190464 bytes free) Router# copy nvram:startup-config usb0: Destination filename [startup-config]? 3172 bytes copied in 0.214 secs (14822 bytes/sec) Router# dir usb0: Directory of usb0:/ Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-14 OL-16506-10...
Page 359: Copying A Startup Configuration File To A Tftp Server
Manual Swact = disabled (system is simplex (no peer unit)) Communications = Down Reason: Simplex mode client count = 66 client_notification_TMR = 30000 milliseconds RF debug mask = 0x0 SSO is configured: Router# configure terminal Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-15 OL-16506-10...
Page 360 The router needs to be reloaded after saving the running configuration to make SSO the operational redundancy mode: Router# reload Proceed with reload? [confirm] *May 27 19:45:16.917: %SYS-5-RELOAD: Reload requested by user on console. Reload Reason: Reload command. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-16 OL-16506-10...
Page 361 San Jose, California 95134-1706 Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Thu 01-May-08 00:29 by mcpre Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-17 OL-16506-10...
Page 362 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 363: Issu—Consolidated Package Upgrade
RF debug mask = 0x0 ISSU—Consolidated Package Upgrade In the following example, ISSU is used to upgrade two RPs in the same Cisco ASR 1000 Series Router to consolidated packages. The RPs are being upgraded from Cisco IOS XE Release 2.1.0, which uses Cisco IOS Release 12.2(33)XNA, to Cisco IOS XE Release 2.1.1, which uses Cisco IOS Release...
Page 364 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 365 Dec 13 2004 03:53:00 -08:00 .ssh -rw- 33554432 Dec 13 2004 03:53:49 -08:00 nvram_00100 -rw- 208904396 Jun 5 2008 20:12:53 -07:00 asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin 58625 drwx 4096 Jul 21 2008 15:32:59 -07:00 .prst_sync Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-21 OL-16506-10...
Page 366 *Jul 21 23:43:31.970: %SYS-5-RESTART: System restarted -- Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 12.2(33)XNA, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-22 OL-16506-10...
Page 367 Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by Cisco Systems, Inc. Compiled Tue 08-Jul-08 14:40 by mcpre Cisco IOS-XE software, Copyright (c) 1986-2008 by Cisco Systems, Inc. All rights reserved. Certain components of Cisco IOS-XE software are licensed under the GNU General Public License ("GPL") Version 2.0.
Page 368 Appendix B Configuration Examples ISSU—Consolidated Package Upgrade A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco ASR1006 (RP1) processor with 1772046K/6147K bytes of memory.
Page 369 After the switchover, the user must log onto RP0. The remaining commands are all entered from RP0: Router# issu acceptversion Cancelling rollback timer SUCCESS: Rollback timer cancelled Router# issu commitversion Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-25 OL-16506-10...
Page 370 If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com.
Page 371 921599K bytes of eUSB flash at bootflash:. 39004543K bytes of SATA hard disk at harddisk:. Configuration register is 0x2102 Router# show running-config | include boot boot-start-marker boot system bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin boot system bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin boot-end-marker Router# Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-27 OL-16506-10...
Page 372 Appendix B Configuration Examples ISSU—Consolidated Package Upgrade Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide B-28 OL-16506-10...
Page 373 TFTP, example command modes, understanding consolidated packages, managing and configuring commands consolidated packages, overview context-sensitive help for abbreviating consolidated packages, restrictions Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-I OL-16506-10...
Page 374 RADIUS attribute forwarding manager process, overview ISSU, consolidated package upgrade example B-19 ISSU, Overview ISSU, sub-packages dual RP 4-74 ISSU, upgrade procedures 4-73 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-II OL-16506-10...
Page 375 Multilink Frame Relay 12-1 RPAccess, Overview RPBase, Overview RPControl, Overview RPIOS, Overview no virtual-template snmp command RPR, Cisco ASR 1002 or 1004SSO, Cisco ASR 1002 or 1004 4-76 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-III OL-16506-10...
Page 376 (graphics-based), overview 14-3 sub-packages, upgrading individual 3-18 web user interface (legacy), overview 14-2 Synchronous Ethernet Support 10-1 web user interface, accessing 14-8 web user interface, authentication 14-7 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-IV OL-16506-10...
Page 377 DNS 14-7 web user interface, overview 14-1 web user interface, tricks and tips 14-10 web user interface, using auto-refresh 14-9 web user interface access, configuring 14-5 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-V OL-16506-10...
Page 378 Index Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide IN-VI OL-16506-10...

This manual is also suitable for:

Asr1000-rp2 - asr 1000 series route processor 2 router Asr 1001 Asr1002-5g-sec/k9 - asr 1002 vpn+fw bundle router Asr1002-5g-sha/k9 - asr 1002 sec+ha bundle router Asr1004-10g-sha/k9 - asr 1004 sec+ha bundle router Asr1004-20g-sec/k9 - asr 1004 vpn+fw bundle router ... Show all

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

CHAPTER 1 Software Packaging and Architecture

Chapter 2 Using Cisco IO XE Software

CHAPTER 3 Consolidated Packages and Subpackages Management

Chapter 4 Software Upgrade Process

Chapter 5 High Availability Overview

CHAPTER 6 Broadband Scalability and Performance

Chapter 7 Configuring Call Home

Chapter 8 Console Port, Telnet, and SSH Handling

CHAPTER 9 Using the Management Ethernet Interface

CHAPTER 10 Synchronous Ethernet Support

CHAPTER 11 Configuring Bridge Domain Interfaces

CHAPTER 12 Monitoring and Maintaining Multilink Frame Relay

Chapter 13 Tracing and Trace Management

CHAPTER 14 Configuring and Accessing the Web User Interface

Unsupported Commands

Appendix A Unsupported Command

Appendix B Configuration Example

Quick Links

Troubleshooting

Related Manuals for Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router

Summary of Contents for Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router