Cisco ASR 1000 Series Software Configuration Manual page 556

Configuring a 24-Port Channelized T1/E1 ATM CEoP SPA in the Clear-Channel ATM Mode
SUMMARY STEPS
1. enable
2. configure terminal
3. controller{ t1 | e1 } slot/subslot/port
4. atm
5. exit
6. interface atm slot/subslot/port.subinterface number point-to-point
7. pvc vpi | vci
8. xconnect peer-router-id vcid {encapsulation mpls | pseudowire-class name}
9. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2 configure terminal
Example:
configure terminal
Router#
Step 3 controller{ t1 | e1 } slot/subslot/port
Example:
Router(config)# controller t1 0/0/2
Step 4 atm
Example:
Router(config-controller)# atm
Step 5 exit
Example:
Router(config-controller)# exit
Step 6
interface atm slot/subslot/port.subinterface
number point-to-point
Example:
Router(config)# interface atm 0/1/2.10
point-to-point
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
510
Configuring the Circuit Emulation over Packet Shared Port Adapter
Purpose
Enables the privileged EXEC mode.
Enter your password, if prompted.
Enters the global configuration mode.
Selects the T1 or E1 controller for the slot, the subslot, or the
port on the SPA.
Configures the port or the slot for the clear-channel ATM.
Returns to the global configuration mode.
Specifies the ATM interface for the SPA port mentioned in
Step 1.
OL-14127-17