Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual

Configuring the 4-Port Serial Interface SPA
The outputs that appear in this document may not match the output you receive when running these
Note
commands. The outputs in this document are examples only.
Command
Router# show version
Router# show controllers
Router# show controllers serial
Router# show interfaces
type
port-adapter-slot-number/interface-port-number
Router# show platform
Router# show running-config
Router# show startup-config
Verification Examples
The following is an example of the show version command with the 4-Port Serial Interface SPA:
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version 12.2(33)XN1,
RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c)
1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Feb-08 08:59 by
ROM: IOS-XE ROMMON
mcp-2ru-2 uptime is 4 minutes
Uptime for this control processor is 6 minutes System returned to ROM by reload System image
file is ''tftp:/tftpboot/mcp-2ru-1/asr1000rp1-advipservicesk9.02.00.01.122-33.XN1.bin''
Last reload reason: Reload command
This product contains cryptographic features and is subject to United States and local
country laws governing import, export, transfer and use. Delivery of Cisco cryptographic
products does not imply third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for compliance with U.S. and
local country laws. By using this product you agree to comply with applicable laws and
regulations. If you are unable to comply with U.S. and local laws, return this product
immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to export@cisco.com.
cisco ASR1002 (RP1) processor with 1647841K/6147K bytes of memory.
4 Gigabit Ethernet interfaces
6 Serial interfaces
2 Channelized T3 ports
32768K bytes of non-volatile configuration memory.
OL-14127-17
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Verifying the Configuration
Purpose
Displays system hardware configuration, the number
of each interface type installed, Cisco IOS software
version, names and sources of configuration files, and
boot images.
Displays all the current interface processors and their
interfaces.
Displays serial line statistics.
Displays status information about a specific type of
interface (for example, serial).
Displays types of hardware installed in your system
and the firmware version.
Displays the running configuration file.
Displays the configuration stored in NVRAM.
Everest 16.5
279