Mac Address Configuration - Cisco ASR 1000 Series Software Configuration Manual

MAC Address Configuration

interface port 1 on the SPA that is located in subslot 0 of the SIP that is installed in slot 0 of the Cisco ASR
1000 Series Routers:
! Enter global configuration mode.
!
Router#
! Enter configuration commands, one per line. End with CNTL/Z.
!
! Specify the interface address.
!
Router(config)#
!
! Configure an IP address.
!
Router(config-if)#
!
! Start the interface.
!
Router(config-if)#
!
! Save the configuration to NVRAM.
!
Router(config-if)#
Router#
MAC Address Configuration
The following example shows how to change the default MAC address on the interface to 1111.2222.3333:
! Enter global configuration mode.
!
Router#
! Enter configuration commands, one per line. End with CNTL/Z.
!
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
170
configure terminal
interface gigabitethernet 0/0/1
ip address 192.168.50.1 255.255.255.0
no shut
exit
copy running-config startup-config
configure terminal
Configuring the Ethernet SPAs
OL-14127-17