Distributed Multilink Ppp Configuration Example - Cisco ASR 1000 Series Software Configuration Manual

Aggregation services routers sip and spa, cisco ios xe everest 16.5

Hide thumbs Also See for ASR 1000 Series:

Table of Contents

Configuring the 4-Port Serial Interface SPA

Distributed Multilink PPP Configuration Example

The following example configures multilink Point-to-Point Protocol encapsulation method for port 0 of the

Serial SPA in subslot 2 of the SIP in slot 1 of the router and sets the IP address and subnet mask:

Router(config)# interface multilink1

Router(config-if)# ip addr 10.0.0.1 255.255.255.0

Router(config)# interface serial3/2/0

Router(config-if)# encapsulation ppp

Router(config-if)# ppp chap hostname X1

Router(config-if)# ppp multilink gr 1

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE

Everest 16.5

Table of Contents