Supported Features - Cisco ASR 1000 Series Software Configuration Manual

Supported Features

Release
Cisco IOS XE Release 2.5S
Cisco IOS XE Release 2.3S
Supported Features
This section provides a list of some of the primary features supported by the ATM hardware and software:
Basic Features
• Bellcore GR-253-CORE SONET/SDH compliance (ITU-T G.707, G.783, G.957, G.958)
• Interface-compatible with other Cisco ATM adapters
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
48
Modification
The following SPA support was introduced on the
Cisco ASR 1000 Series Aggregation Services Routers
in Cisco IOS XE Release 2.5S:
• 1-Port Clear Channel OC-12 ATM SPA
The following new feature support was introduced
for the ATM SPAs in Cisco IOS XE Release 2.5S:
• Access Node Control Protocol (ANCP)
• ATM Multipoint Subinterfaces
• ATM PVC Ranges
• CISCO-PPPOE-MIB
• Local Template-Based ATM PVC Provisioning
• Point-to-Point Protocol Over Ethernet Over
ATM (PPPoEoA)
• PPPoE Connection Throttling
In addition to the Configuring the ATM SPAs chapter
in this guide, see the following link for a list of new
features in Cisco IOS XE Release 2.5:
www.cisco.com/c/en/us/support/ios-nx-os-software/
ios-xe-release-2/products-feature-guides-list.html.
Initial release for the 1-Port Clear Channel OC-3
ATM SPA and 3-Port Clear Channel OC-3 ATM SPA
for Cisco Aggregation Services Router 1000 Series.
Overview of the ATM SPAs
http://
OL-14127-17