Management System - Cisco ASR 1000 Series Software Configuration Manual

Configuring the Cisco WebEx Node for the ASR
1000 Series Aggregation Services Routers
This chapter provides information about configuring the Cisco WebEx Node for ASR 1000 Series on the
Cisco ASR 1000 Series Aggregation Services Routers, also referred to in this document as the Cisco WebEx
Node SPA.
•
•
•
•
Prerequisites
Complete the following prerequisites to successfully activate your Cisco WebEx Node for ASR 1000 Series:
Registering with the WebEx Data Center and the Cisco WebEx Node

Management System

To successfully activate a Cisco WebEx Node for ASR 1000 Series, certain registration and provisioning
activities must be performed with the WebEx Data Center using the Cisco WebEx Node Management System.
The Cisco WebEx Node Management System also provides monitoring and reporting for Cisco WebEx nodes.
Once the SPA is registered with the WebEx Data Center, certain node security information must be gathered
and then configured on the Cisco WebEx Node for ASR 1000 Series.
OL-14127-17
Prerequisites, page 353
Configuration Tasks, page 357
Verifying the Service Engine Configuration, page 362
Configuration Examples, page 380
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
22
C H A P T E R
Everest 16.5
353