Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
SUMMARY STEPS
1. Download the software of the Cisco ASR 1000 Series Aggregation Services Routers from:
software.cisco.com/download/navigator.html?mdfid=281716314&flowid=1362
2. Copy the consolidated package to the bootflash:
3. Copy the sipspawmak9 package to the bootflash:
4. Expand the consolidated package into the bootflash:
5. If you are running a dual RP system (hardware redundant system), perform the following step, else skip
to step 7.
6. Copy the consolidated image to the standby bootflash:
7. Expand the consolidated package into the standby bootflash:
8. Enter the configuration mode:
9. Remove the old boot package from the bootflash:
10. Log in to the Cisco ASR 1000 Series Aggregation Services Router.
11. Verify that the new packages are running after the Cisco ASR 1000 Series Aggregation Services Router
reboots:
12. Check whether the ROMMON version in WebEx SPA is up-to-date by using the show platform command.
If it is not, use the upgrade rommon all command to update the ROMMON version.
13. Deploy the WebEx SPA package:
14. Verify that the SPA is active:
15. Go to
16. Choose Administration > Node management.
17. Select all the individual node names.
18. Copy the wma-passcode string to all the nodes, for example, mtg_webex-web
d2bc97983456676fbb7ea5cfcc2c3a57
19. Enter the configuration mode:
20. Enter the individual SPA interfaces, and re-enter the wma-passcodes:
21. Write configuration to memory:
22. Verify that the running configuration is pointing to the correct node determined in Step 8:
23. Make sure that you are on the same network as the Cisco ASR 1000 Series Aggregation Services Router
or VPN, and start a WebEx meeting.
24. Verify that network traffic is traversing the WebEx SPA card on the Cisco ASR 1000 Series Aggregation
Services Router by running the following commands:
25. Access the SIP console by using the request platform software console attach slot/subslot command.
DETAILED STEPS
Step 1
Download the software of the Cisco ASR 1000 Series Aggregation Services Routers from:
download/navigator.html?mdfid=281716314&flowid=1362
The consolidated package is asr1000rp1-adventerprisek9.03.09.01.S.153-2.S1.bin
The WebEx node package is asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg
Step 2
Copy the consolidated package to the bootflash:
OL-14127-17
https://wma.webex.com
and log in.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Configuring the WebEx Node
http://
http://software.cisco.com/
Everest 16.5
377