Configuration Examples - Cisco ASR 1000 Series Software Configuration Manual

Configuring the Ethernet SPAs
Command or Action
Example:
Rx(K1/K2): 00/00
Example:
S1S0 = 00, C2 = 0x1A
Example:
PATH TRACE BUFFER: STABLE
Example:
Remote J1 Byte : an4ru-
Example:
Example:
BER thresholds:
Example:
TCA thresholds:

Configuration Examples

This section includes the following configuration examples:
Basic Interface Configuration
The following example shows how to enter the global configuration mode to specify the interface that you
want to configure, configure an IP address for the interface, and save the configuration. This example configures
OL-14127-17
Tx(K1/K2): 00/00
SD = 10e-8 SF = 10e-9
B1 = 10e-4 B2 = 10e-5 B3 = 10e-6
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Purpose
Configuration Examples
Everest 16.5
169