Getting Help - Cisco ASR 1000 Series Software Configuration Manual

Getting Help

Table 3: Accessing and Exiting Command Modes
Command Mode
User EXEC
Privileged EXEC
Global configuration
Interface configuration
ROM monitor
For more information on command modes, refer to the "Using the Command-Line Interface" chapter in the
http://www.cisco.com/en/US/docs/ios/fundamentals/configuration/guide/12_4/cf_12_4_book.html
Configuration Fundamentals Configuration Guide .
Getting Help
Entering a question mark (?) at the CLI prompt displays a list of commands available for each command
mode. You can also get a list of keywords and arguments associated with any command by using the
context-sensitive help feature.
To get help specific to a command mode, a command, a keyword, or an argument, use one of the following
commands, as shown in the following table:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
8
Access Method
Log in.
From user EXEC mode, use the
enable EXEC command.
From privileged EXEC mode,
use the configure terminal
privileged EXEC command.
From global configuration
mode, specify an interface using
an interface command.
From privileged EXEC mode,
use the reload EXEC
command. Press the Break key
during the first 60 seconds
while the system is booting.
Prompt
Router>
Router#
Router(config)#
Router(config-if)#
>
Using Cisco IOS XE Software
Exit Method
Use the logout command.
To return to user EXEC mode,
use the disable command.
To return to privileged EXEC
mode from global configuration
mode, use the exit or end
command.
To return to global
configuration mode, use the exit
command.
To return to privileged EXEC
mode, use the end command.
To exit ROM monitor mode,
use the continue command.
Cisco IOS
OL-14127-17