Supported Sip Features - Cisco ASR 1000 Series Software Configuration Manual

Supported SIP Features

Release
Cisco IOS XE Release 2.4S
Cisco IOS XE Release 2.3S
Cisco IOS XE Release 2.2S
Cisco IOS XE Release 2.1S
Supported SIP Features
The Cisco ASR1000-SIP10, is a high-performance, feature-rich SPA interface processor that functions as a
carrier card for shared port adapters (SPAs) on the Cisco ASR 1000 Series Routers. The SIP is supported on
the Cisco Aggregation Services Router 1000 Series, and is compatible with one or more platform-independent
SPAs. For more information on SPA compatibility, see the SIP and SPA Compatibility section.
This section provides a list of some of the primary features supported by the SIP hardware and software. For
feature compatibility information by SIP and SPA combination, and information about configuring these
features, see the Configuring the SIP chapter.
Cisco ASR1000-SIP10 Features
The Cisco ASR1000-SIP10 supports the standard Field-Programmable Devices (FPD) upgrade methods for
the Cisco Aggregation Services Router 1000 Series. For more information about FPD support, see the
Upgrading Field-Programmable Devices chapter.
Cisco ASR1000-SIP40 Features
The Cisco ASR1000-SIP40 supports upto 40 Gbps total bandwidth for the four SPA bays and 46 Gbps
sustained through carrier card when utilizing two four-link 6.25 GHz ESIs. Following are the features of the
Cisco ASR1000-SIP40:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
28
Modification
Added information about the following SPAs:
• 2-Port, 4-Port, and 8-Port OC-12 POS SPA
• 1-Port OC-48 POS SPA
• 8-Port OC-3 POS SPA
• 1-Port OC-192 POS SPA
• WMA-K9 SPA
Added information about the 1-Port and 3-Port OC-3
ATM SPA.
Added information about the following SPAs:
• 2-Port and 4-Port OC-48c/STM-16 POS/RPR
SPA
• 1-Port Channelized STM-1/OC-3 SPA
First release.
Overview of the SIP
OL-14127-17