Completing The Cisco Webex Node Spa Configuration Prerequisites - Cisco ASR 1000 Series Software Configuration Manual

Completing the Cisco WebEx Node SPA Configuration Prerequisites

• Site name (for example, cisco.webex.com)
• SPA serial number (use the show diag [all | chassis | slot | subslot] eeprom command to view the serial number
of the WebEx SPA, for example, router# show diag subslot 0/1 eeprom detail)
• Assigned hostname
• Conferencing mode (either web conferencing or voice and video conferencing)
Step 2
After the Cisco WebEx Node SPA is registered in the Cisco WebEx Node Management System, obtain the following
information from the Node Information page for the SPA in the Cisco WebEx Node Management System:
• wma-passcode—Must match the value in the service-engine wma-passcode configuration command on the Cisco
WebEx Node SPA.
• wma-token—Must match the value in the service-engine wma-token configuration command on the Cisco WebEx
Node SPA.
• wma-url—The URL string from the Cisco WebEx Node Management System must be configured on the Cisco
WebEx Node SPA using the service-engine wma-url command.
Note This security information must be configured on the Cisco WebEx Node for ASR 1000 Series SPA using the
CLI. For more information about configuring the CLI, see the
on page
Completing the Cisco WebEx Node SPA Configuration Prerequisites
Prior to configuring the Cisco WebEx Node SPA, you must ensure that the following tasks are completed:
• A Cisco IOS XE software image is loaded on your Cisco ASR 1000 Series Router that is compatible
For more information about Cisco IOS XE package compatibility and installation instructions, see the
Consolidated Packages and Sub-Package Management
routers/asr1000/configuration/guide/chassis/asrswcfg.html
Routers Software Configuration Guide .
• After the router is configured to run using individual subpackages, download and install the webex
router# request platform software package install rp
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
356
Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
358.
with the Cisco WebEx Node SPA. The Cisco WebEx Node SPA provides K9 encryption, and you must
also download and install the optional sipspawmak9 subpackage. To complete the installation of the
Cisco Webex Node SPA, perform the steps mentioned in the following sections:
◦ Managing and Configuring a Router to Run Using Individual SubPackages From a Consolidated
Package
◦ Managing and Configuring a Router to Run Using Optional SubPackages
sipspawmak9 subpackage. Use the request platform software package install rp rp-slot-number file
storage-device:sipspa-package-name command in the privileged EXEC mode or the diagnostic mode
to upgrade the SIPSPA subpackage. For example:
Configuring the Virtual Service Engine Interface,
chapter of the http://www.cisco.com/en/US/docs/
Cisco ASR 1000 Series Aggregation Services
OL-14127-17