Cisco ASR 1000 Series Software Configuration Manual page 25

Contents
OL-14127-17
Configuring a 24-Port Channelized T1/E1 ATM CEoP SPA in the Clear-Channel ATM Mode
Examples for Configuring a 24-Port Channelized T1/E1 ATM CEoP SPA in the Clear-Channel
ATM Mode 511
Configuring SONET (OC-3)
Configuring the SONET Controller
Configuring SDH for AU-4 C-12
Configuring SDH for AU-3 C-11
Configuring Clocking
517
BITS Clock Support Receive and Distribute CEM SPA
Guidelines for Configuring the Network Clock
Configuring the Network Clock
Verifying the Network Clock Configuration
Configuring Clock Recovery
Applying the Recovered Clock to the Controller
Example for Configuring Clock Recovery
Configuration on CE1
Configuration on PE1
configuration on CE2
Configuration on PE2
Verifying Clock Recovery
Configuring Out-of-Band Clocking
Benefits of Out-Of-Bank Clocking
Guidelines for Configuring Out-Of-Band Clocking
Overview of Configuring Out-of-band Clocking Between Two CEM SPAs
Creating the Master Clock Interface
Configuring an Out-Of-Band Channel
Configuring the Slave Clock Interface
Verifying Out-of-Band Clocking
Removing the Out-of-Band Clocking Configuration
Example: Out-of-Band Clocking Configuration
Example: Configuring CEM Circuits for Out-of-Band Clocking
Configuring CEM Parameters
Configuring Payload Size (Optional)
Setting the Dejitter Buffer Size
Setting the Idle Pattern (Optional)
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
514
514
515
516
517
518
519
519
521
521
521
522
522
522
522
522
523
525
526
527
528
530
533
533
533
533
517
523
524
530
532
Everest 16.5
509
xxv