Configuring The Lan-Phy Mode - Cisco ASR 1000 Series Software Configuration Manual

Aggregation services routers sip and spa, cisco ios xe everest 16.5
Table of Contents

Advertisement

Configuring the Ethernet SPAs
Command or Action
Example:
end

Configuring the LAN-PHY Mode

This section describes how to configure the LAN-PHY mode on the 1-Port 10GE LAN/WAN-PHY Shared
Port Adapter (SPA-1X10GE-WL-V2).
SUMMARY STEPS
1. show controllers wanphy 0/1/0
2. configure terminal
3. hw-module subslot slot/subslot enable LAN
4. exit
5. show controllers wanphy 0/1/0
DETAILED STEPS
Command or Action
Step 1
show controllers wanphy 0/1/0
Example:
Router# show controllers wanphy 0/1/0
Example:
TenGigabitEthernet0/1/0
Example:
Mode of Operation: WAN Mode
Example:
SECTION
Example:
LOF = 0
BIP(B1) = 0
OL-14127-17
Purpose
LOS
= 0
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Configuring the LAN-PHY Mode
Purpose
Displays the configuration mode of the
LAN/WAN-PHY controller. By default, prior to
configuration of the LAN-PHY mode, the
controller operates in the WAN-PHY mode.
Everest 16.5
151

Advertisement

Table of Contents
loading

Table of Contents