Cisco ASR 1000 Series Software Configuration Manual page 455

Configuring the Cisco DSP SPA for the ASR 1000 Series Aggregation Services Routers
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2 configure terminal
Example:
Router# configure terminal
Step 3
voice-card slot/subslot
Example:
Router(config)# voice-card 1/1
Step 4 dsp services dspfarm
Example:
Router(config-voicecard)# dsp services
dspfarm
Step 5 exit
Example:
Router(config-voicecard)# exit
Step 6
dspfarm profile profile-identifier {transcode
[universal]}
Example:
Router(config)# dspfarm profile 1 transcode
universal
Step 7 description text
Example:
Router(config-dspfarm-profile)# description
low2mediumcomp
Step 8 codec codec-type
Example:
Router(config-dspfarm-profile)# codec
g723r63
OL-14127-17
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Enters voice card configuration mode for the SPA-DSP on which
you want to enable DSP-farm services.
Enables DSP-farm services for the SPA-DSP voice card.
Exits voice card configuration mode.
Enters DSP farm profile configuration mode to define a profile
for DSP farm services.
The profile-identifier and service type uniquely identify
Note
a profile. If the service type and profile-identifier pair are
not unique, you are prompted to choose a different
profile-identifier .
(Optional) Includes a specific description about the Cisco DSP
farm profile.
Specifies the codecs supported by a DSP farm profile.
By default, the codecs g711ulaw, g711alaw, g729ar8,
Note
and g729abr8 are created for each DSP farm profile.
Configuring a DSP Farm Profile
Everest 16.5
409