Overview Of The Cisco Dsp Spa For The Asr 1000 Series Aggregation Services Routers - Cisco ASR 1000 Series Software Configuration Manual

Overview of the Cisco DSP SPA for the ASR 1000
Series Aggregation Services Routers
This chapter provides an overview of the release history, features, and MIB support for the Cisco Voice SPA
for the ASR 1000 Series on the Cisco ASR 1000 Series Aggregation Services Routers. The Cisco Voice
SPA is also referred to as the SPA-DSP in this document.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
Release History
Release
Cisco IOS XE Release 3.8.0S
Cisco IOS XE Release 3.4.0S
OL-14127-17
Release History, page 397
Prerequisites, page 398
Rules for Installing SPA-DSP, page 398
Overview of the Cisco DSP SPA, page 399
Supported Features, page 401
Restrictions, page 403
Introduction to RTCP, page 403
Supported MIBs, page 404
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
24
C H A P T E R
Modification
Support for the Adaptive Multi-Rate Wideband
(AMR-WB) feature was provided on the SBC on the
Cisco ASR 1000 Series Aggregation Services Routers.
Support for the termination and generation of
Real-Time Transport Control Protocol (RTCP) on the
SPA-DSP was added on the Cisco ASR 1000 Series
Router. To enable the RTCP, the rtcp-regenerate
command was introduced on the Cisco ASR 1000
Series Aggregation Services Routers.
Everest 16.5
397