Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual

Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
SUMMARY STEPS
1. Router(config)# ip nat inside source static private-ip-address public-ip- address
2. Router(config)# interface service- engine slot/subslot/0
3. Router(config-if)# ip address router-side-ip-address
4. Router(config-if)# service-engine ip address module-side-ip-address subnet-mask
5. Router(config-if)# service-engine default-gateway gateway-ip-address
6. Router(config-if)# service-engine nameserver name-server1-ip-address name-server2-ip-address
7. Router(config-if)# service-engine hostname module-side-hostname module-side-domain-name
8. Router(config-if)# service-engine wma-url url-string
9. Router(config-if)# service-engine wma-token token-string
10. Router(config-if)# service-engine wma-passcode name-string key-string
11. Router(config-if)# no shutdown
DETAILED STEPS
Command or Action
Step 1 Router(config)# ip nat inside source
static private-ip-address public-ip-
address
Step 2 Router(config)# interface service-
engine slot/subslot/0
Step 3
Router(config-if)# ip address
router-side-ip-address
Step 4 Router(config-if)# service-engine ip
address module-side-ip-address
subnet-mask
Step 5 Router(config-if)# service-engine
default-gateway gateway-ip-address
Step 6 Router(config-if)# service-engine
nameserver name-server1-ip-address
name-server2-ip-address
OL-14127-17
Purpose
Enables the NAT of the inside source address, which converts the private address
of the service engine to the public address.
• private-ip-address—The IP address of the service engine.
• public ip-address—The public IP address that has Domain Name System
(DNS) to register the Cisco Webex Node SPA in the Cisco WebEx Node
Management System. The DNS name of the public IP address is the
hostname of the Cisco Webex Node SPA.
Specifies the service engine interface to configure, where:
Specifies the IP address of the router-side interface.
Configures the Cisco WebEx Node SPA service engine IP address, where:
• module-side-ip-address —Specifies the IP address for the service engine
interface.
• subnet mask —Specifies the mask for the associated IP subnet.
Note
Specifies the IP address for the service engine default gateway.
Note
Specifies the primary and secondary domain name server that will be used by
the WebEx Node SPA, where:
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Configuring the Virtual Service Engine Interface
The service-engine IP address must be on the same subnet as the
router-side IP address for the service-engine interface.
This IP address must mach the IP address configured in the ip address
command for the router-side IP address.
Everest 16.5
359