Configuration Tasks - Cisco ASR 1000 Series Software Configuration Manual

Configuring the 2-Port and 4-Port Channelized
T3 SPAs
This chapter provides information about configuring the 2-Port and 4-Port Channelized T3 SPAs on the
Cisco ASR 1000 Series Routers.
•
•
•

Configuration Tasks

This section describes how to configure the 2-Port and 4-Port Channelized T3 SPA for the Cisco ASR 1000
Series Routers and verify the configuration. For information about managing your system images and
configuration files, refer to the following:
•
•
•
Required Configuration Tasks
This section lists the required configuration steps to configure the 2-Port and 4-Port Channelized T3 SPA.
Some of the required configuration commands implement default values that might be appropriate for your
network.
To better understand the address format used to specify the physical location of the SIP, SPA, and interfaces,
Note
see the
OL-14127-17
Configuration Tasks, page 237
Verifying the Interface Configuration, page 250
Configuration Examples, page 251
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Cisco IOS Configuration Fundamentals Configuration Guide
Cisco IOS Configuration Fundamentals Command Reference
Specifying the Interface Address on a SPA, on page
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
16
C H A P T E R
242.
Everest 16.5
237