Cisco ASR 1000 Series Software Configuration Manual page 520

Release History
Release History
Release
Cisco IOS XE Release 3.10S
Cisco IOS XE Release 3.6S
Cisco IOS XE Release 3.5S
Cisco IOS XE Release 3.4S
Cisco IOS XE Release 3.3S
For more information pertaining to the restrictions about the Circuit Emulation SPAs, see the "
Note
SPA Product Overview" chapter
Configuration Tasks
This section describes the most common configurations for the SPA-1CHOC3-CE-ATM on the Cisco ASR
1000 Series Routers. For information about managing your system images and configuration files, see the
following documents:
•
•
•
•
Referring an Interface on a SPA
Four CEoP SPAs can be installed in a SPA interface processor (SIP). Ports are numbered from left to right,
beginning with 0. Single-port SPAs use only the port number 0. To configure or monitor SPA interfaces, you
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
474
in the
Cisco ASR 1000 SIP and SPA Hardware Installation Guide
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Cisco IOS Configuration Fundamentals Configuration Guide
Cisco IOS Configuration Fundamentals Command Reference
Configuring the Circuit Emulation over Packet Shared Port Adapter
Modification
Added information about support for ATM on the
SPA-24CHT1-CE-ATM.
Added information about support for the Circuit
Emulation (CEM) mode for the 2-Port Channelized
T3/E3 ATM CEoP SPA.
Added information about support for the
SPA-2CHT3-CE-ATM in clear-channel E3 mode.
Information added for the following SPAs:
• 2-Port Channelized T3/E3 ATM CEoP SPA
• 24-Port Channelized T1/E1 ATM CEoP SPA
Support for the 1-Port Channelized OC3/STM-1 ATM
and Circuit Emulation SPA was introduced in the
Cisco ASR 1000 Series Aggregation Services Routers.
Cisco ASR 1000 Series Hardware Installation Guide
SIP and
.
OL-14127-17