Troubleshooting the Cisco WebEx Node for the
ASR 1000 Series Aggregation Services Routers
This chapter describes techniques that you can use to troubleshoot the operation of the Cisco WebEx Node
for ASR 1000 Series on the Cisco ASR 1000 Series Aggregation Services Routers, also referred to in this
document as the Cisco WebEx Node SPA.
For more information about troubleshooting your hardware installation, see also the
en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/asr_sip_spa_hw.html
Aggregation Services Router 1000 Series SIP and SPA Hardware Installation Guide.
•
•
•
•
General Troubleshooting Information
This section provides the following general information for troubleshooting the Cisco WebEx Node SPA:
Interpreting Console Error and System Messages
Refer to
System error messages are organized in the documentation according to the particular system facility that
produces the messages. The SIP and SPA error messages use the following facility names:
• Cisco ASR 1000 Series SIP:
• Cisco WebEx Node SPA:
OL-14127-17
General Troubleshooting Information, page 381
Performing Basic Troubleshooting, page 389
Using the Cisco IOS Event Tracer to Troubleshoot Problems, page 395
Preparing for Online Insertion and Removal of a SPA, page 395
Cisco IOS XE System Messages
◦ ASR1000_SIP
◦ ASR1000_SIP_SPA
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
C H A P T E R
document.
23
http://www.cisco.com/
Cisco
Everest 16.5
381