Restrictions - Cisco ASR 1000 Series Software Configuration Manual

Overview of the Cisco WebEx Node for the Cisco ASR 1000 Series Routers
• 250-GB hard disk drive, with self-monitoring, analysis, and reporting technology (SMART) support for
• Faceplate LEDs to indicate SPA status, hard disk drive activity, and system status
• A Shutdown button to stop hard drive access activity before removing the SPA to prevent data corruption
• Voltage and temperature monitoring
• Online insertion and removal (OIR)
• Downloadable configuration from the WebEx Data Center
• Support for web conferencing or voice and video conferencing, and up to 500 clients for media or 600
• Effective from Cisco IOS XE Release 3.6.0S, the Audio and Video SPA:
• Effective from Cisco IOS XE Release 3.8.0S, the WebEx Node SPA supports Version T28.4 of WebEx.
• Secure Sockets Layer (SSL) connection between the Cisco WebEx Node SPA and the WebEx Data
• Monitoring the Cisco WebEx Node SPA from the Cisco WebEx Data Center.
• Automatic recovery for service failures on a Cisco WebEx Node SPA by another Cisco WebEx Node
For detailed information about the hardware features and benefits of the Cisco WebEx Node for the Cisco
ASR 1000 Series Aggregation Services Routers, refer to the product data sheet at:
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps10128/ps10339/ps10353/data_sheet_c78-530577.html

Restrictions

• Performance can be affected if there is a slow connection to the WebEx Data Center because
• Before the Cisco WebEx Node SPA is removed, the software and the hard drive should be gracefully
• Either web conferencing or voice and video conferencing are supported, but both are not supported on
• The Cisco ASR 1002-X Router was introduced in Release 3.7.0S. This router does not support the Cisco
OL-14127-17
application data and system log storage
streams for mixed audio and multipoint video
◦ Supports HD video.
◦ Collects QoS data, such as latency and jitter, for monitoring purposes. Note that the WebEx
performance monitoring tools use the QoS data present in the server trace logs for debugging
purposes.
◦ Tracks the quality of media controller servers. This is used to track the connections between the
Audio and Video SPA and the audio and video servers in the data center.
This version supports Cisco TelePresence WebEx OneTouch 2.0.
Center, and secure connection between the Cisco WebEx Node SPA and Cisco WebEx clients.
SPA, or by the Cisco WebEx collaboration cloud.
communication between different Cisco WebEx Node SPAs has to go through the WebEx Data Center.
shut down, either using the Shutdown button or the hw-module subslot stop command.
the same Cisco WebEx Node SPA.
WebEx Node SPA.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Restrictions
Everest 16.5
349