Vlan Configuration - Cisco ASR 1000 Series Software Configuration Manual

Configuring the Ethernet SPAs
! Specify the interface address
!
Router(config)#
!
! Configure the interface MTU.
!
Router(config-if)#

VLAN Configuration

The following example shows how to create the subinterface number 268 on SPA interface port 2 (the third
port), and configure the subinterface on the VLAN with the ID number 268, using IEEE 802.1Q encapsulation:
! Enter global configuration mode.
!
Router#
! Enter configuration commands, one per line. End with CNTL/Z.
!
! Specify the interface address
!
Router(config)#
!
! Configure dot1q encapsulation and specify the VLAN ID.
!
Router(config-subif)#
OL-14127-17
interface gigabitethernet 0/0/1
mtu 9216
configure terminal
interface gigabitethernet 2/0/1.268
encapsulation dot1q 268
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
VLAN Configuration
Everest 16.5
173