Cisco ASR 1000 Series Software Configuration Manual page 515

Overview of the Circuit Emulation over Packet Shared Port Adapter
• CISCO-IF-EXTENSION-MIB
• CISCO-IETF-PW-MIB
• CISCO-IETF-PW-MPLS-MIB
• CISCO-ENTITY-ALARM-MIB
• DS1-MIB
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use the Cisco MIB
Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index
If the Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list of
the supported MIBs and download the MIBs from the Cisco MIBs page at:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
To access the Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost your
account information, send a blank e-mail to cco-locksmith@cisco.com . An automatic check will verify if
your e-mail address is registered with Cisco.com. If the check is successful, an e-mail containing your account
details and a new random password will be sent to you. Qualified users can establish an account on Cisco.com
by following the directions found at:
https://tools.cisco.com/RPF/register/register.do
Displaying the SPA Hardware Type
To verify the SPA hardware type that is installed in your Cisco ASR 1000 Series Routers, use either the show
interfaces command or the show diagcommand. A number of other show commands also provide information
about the SPA hardware.
The following table shows the hardware description that appears in the show command output for each type
of Circuit Emulation SPA that is supported on the Cisco ASR 1000 Series Routers:
Table 53: Circuit Emulation SPA Hardware Descriptions in show Commands
SPA
SPA-1CHOC3-CE-ATM
SPA-2CHT3-CE-ATM
SPA-24CHT1-CE-ATM
Examples of the show interfaces cem Command
The following example shows an output of the show interfaces cem command on a Cisco ASR 1000 Series
Routers with the SPA-1CHOC3-CE-ATM installed in the first subslot of a SIP that is installed in slot 0:
Router# show interfaces cem 5/3/0
OL-14127-17
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Displaying the SPA Hardware Type
Description in the show interfaces Command
"Hardware is SPA-1CHOC3-CE-ATM"
"Hardware is SPA-2CHT3-CE-ATM"
"Hardware is SPA-24CHT1-CE-ATM"
Everest 16.5
469