1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR-1000-SIP10
  6. Hardware installation manual

Cisco ASR-1000-SIP10 Hardware Installation Manual

Asr 1000 series aggregation services routers sip and spa
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco ASR 1000 Series Aggregation
Services Routers SIP and SPA Hardware

Installation Guide

November 24, 2008
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: 3OL-14126-02

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR-1000-SIP10

Summary of Contents for Cisco ASR-1000-SIP10

  • Page 1: Installation Guide

    Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide November 24, 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: 3OL-14126-02...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...
  • Page 3 2-Port and 4-Port T3/E3 Clear Channel Serial SPA Interface Specifications 2-Port and 4-Port T3/E3 Clear Channel Serial SPA Cables and Connectors 2-Port and 4-Port Channelized T3 Serial SPA Overview Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 4 8-Port Gigabit Ethernet SPA Connectors 3-23 SFP Module Connections 3-23 10-Port Gigabit Ethernet SPA Overview 3-24 10-Port Gigabit Ethernet SPA LEDs 3-24 10-Port Gigabit Ethernet SPA Connectors 3-25 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 5 Installing and Removing a SIP C H A P T E R Handling SIPs Online Insertion and Removal Preparing for Online Removal of a SIP Deactivating a SIP Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 6 Troubleshooting the Installation C H A P T E R Troubleshooting Using debug Commands Packing a SPA for Shipment Packing a SIP for Shipment N D E X Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 7: Document Revision History

    SIPs and SPAs and how to troubleshoot the installation. Document Revision History The Document Revision History records technical changes to this document. The table shows the Cisco IOS software release number and document revision number for the change, the date of the change, and a brief summary of the change.

  • Page 8: Related Documentation

    Cisco IOS mainline release. You can also refer to the specific Cisco IOS software document for a particular feature. To see if a feature is supported by a Cisco IOS release, to locate the software document for that –...

  • Page 9: Obtaining Documentation And Submitting A Service Request

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 10 Preface Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 11: Sip And Spa Product Overview

    Modular Optics Compatibility, page 1-3 • For software details for the specific SIPs and SPAs that are supported on the Cisco ASR 1000 Series Aggregation Services Routers, refer to the companion publication, Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide.

  • Page 12: Chapter 1 Sip And Spa Product Overview

    SPA 1 SPA 2 SPA 3 SIP subslot 0 is not available on the Cisco ASR 1002 Router as that is the slot occupied by the integrated Caution Route Processor with native Gigabit Ethernet ports. Each SPA provides a certain number of connectors, or ports, that are the interfaces to one or more •...

  • Page 13: Sip And Spa Compatibility

    SFP module is inserted into a SPA and only SFP modules that pass this check will be usable. Table 1-4, Table 1-5, Table 1-6, and Table 1-7 show the types of optics modules that have been qualified for use with a SPA. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 14: Modular Optics Compatibility

    Gigabit Ethernet SPA CWDM Optics Compatibility for All Gigabit Ethernet SPAs Supported on the Cisco ASR 1000 Series Routers Qualified Optics Modules (Cisco Part Numbers) CWDM-SFP-1470= CWDM-SFP-1490= CWDM-SFP-1510= CWDM-SFP-1530= CWDM-SFP-1550= CWDM-SFP-1570= CWDM-SFP-1590= CWDM-SFP-1610= Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 15 DWDM-SFP-3582= DWDM-SFP-3661= DWDM-SFP-3819= DWDM-SFP-3898= DWDM-SFP-3977= DWDM-SFP-4056= DWDM-SFP-4214= DWDM-SFP-4294= DWDM-SFP-4373= DWDM-SFP-4453= DWDM-SFP-4612= DWDM-SFP-4692= DWDM-SFP-4772= DWDM-SFP-4851= DWDM-SFP-5012= DWDM-SFP-5092= DWDM-SFP-5172= DWDM-SFP-5252= DWDM-SFP-5413= DWDM-SFP-5494= DWDM-SFP-5575= DWDM-SFP-5655= DWDM-SFP-5817= DWDM-SFP-5898= DWDM-SFP-5979= DWDM-SFP-6061= Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 16 2-Port and 4-Port OC-48c/STM-16 POS/RPR SPA SFP-OC48-SR • SFP-OC48-IR1 • SFP-OC48-LR2 • 1-Port OC-12c/STM-4 POS SPA SFP-OC12-MM • SFP-OC12-SR • SFP-OC12-IR1 • SFP-OC12-LR1 • SFP-OC12-LR2 • Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 17: Spa Interface Processors

    Cisco ASR 1000 Series SPA Interface Processor Overview, page 2-5 • SIP Summary Summary descriptions of the SIPs that are supported on the Cisco ASR 1000 Series Routers are shown Table 2-1. The Description column indicates the aggregate bandwidth supported by the SIP across all subslots—not Note per SPA subslot.

  • Page 18: C H A P T E R 2 Overview: Cisco Asr 1000 Series Aggregation Services Routers Sips

    Identifying Slots and Subslots for SIPs and SPAs This section describes how to specify the physical locations of a SIP and SPA on the Cisco ASR 1000 Series Routers within the command-line interface (CLI) to configure or monitor the devices.
  • Page 19 SPA-1X10GE-L-V2 22:45:22 SPA-1XOC12-POS 22:45:18 ASR1000-SIP10 1d20h SPA-5X1GE-V2 1d20h SPA-5X1GE-V2 1d20h SPA-5X1GE-V2 1d20h SPA-5X1GE-V2 1d20h ASR1000-RP1 ok, active 3d20h ASR1000-ESP10 ok, active 3d20h ASR1006-PWR-AC 3d20h ASR1006-FAN 3d20h Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 20: Specifying The Sip Subslot Location For A Spa

    • SIP subslot 3—Bottom-right subslot • In the Cisco ASR 1002 Router, SIP subslot 0 is not available for SPA insertion. It is the slot that is used Note for the integrated Route Processor and Gigabit Ethernet ports. Figure 2-2 shows the SPA numbering sequence on a Cisco ASR 1000 Series Routers SIP.

  • Page 21: Cisco Asr 1000 Series Spa Interface Processor Overview

    PWR STATUS SPA, subslot 0 PWR LED SPA, subslot 1 STATUS LED SPA, subslot 2 SPA, subslot 3 The Cisco ASR1000-SIP10 LEDs are described in Table 2-3. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 22: Cisco Asr1000-Sip10 Physical Specifications

    Short Term—40.9 to 131°F (5 to 55°C) Relative humidity Operating Humidity Nominal—5% to 85% noncondensing Operating Humidity Short Term—5% to 90% noncondensing Storage temperature –40 to 167°F (–20 to 70°C) Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 23: Shared Port Adapters

    Overview: Cisco ASR 1000 Series Aggregation Services Routers Shared Port Adapters This chapter describes the shared port adapters (SPAs) that are supported on the Cisco ASR 1000 Series Aggregation Services Routers and contains the following sections: SPA Summary, page 3-1 •...

  • Page 24: Checking Hardware And Software Compatibility

    To check the minimum software requirements of Cisco IOS software with the hardware installed on your router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether SIPs or SPAs within a system are compatible, but it does provide the minimum Cisco IOS requirements for individual hardware modules or components.

  • Page 25: C H A P T E R 3 Overview: Cisco Asr 1000 Series Aggregation Services Routers Shared Port Adapters

    CAB-T3E3-RF-BNC-F (T3 or E3 Cable, 1.0/2.3 RF to BNC-Female, 10 feet) • CAB-T3E3-RF-OPEN (T3 or E3 Cable, 1.0/2.3 RF to BNC-Open end, 10 feet) • The Cisco cable part numbers are 72-4124-01 (with male BNC end) and 72-4131-01 (with female BNC Note end). Figure 3-1...

  • Page 26: Port And 4-Port Channelized T3 Serial Spa Overview

    Figure 3-2. Figure 3-2 4-Port Channelized T3 Serial SPA Faceplate SPA-4XCT3/DS0 C/A (Carrier/Alarm) LED RX (Receive) connector A/L (Active Loopback) LED STATUS LED TX (Transmit) connector Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 27: Port And 4-Port Channelized T3 Serial Spa Interface Specifications

    CAB-T3E3-RF-BNC-F (T3 or E3 Cable, 1.0/2.3 RF to BNC-Female, 10 feet) • CAB-T3E3-RF-OPEN (T3 or E3 Cable, 1.0/2.3 RF to BNC-Open end, 10 feet) • The Cisco cable part numbers are 72-4124-01 (with Male BNC end) and 72-4131-01 (with Female BNC Note end). Figure 3-2...

  • Page 28: Port Serial Interface Spa Overview

    ACTIVE The SPA port is not enabled by the field-programmable gate array (FPGA). The SPA port does not have any frame activity on RX/TX Layer 1. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 29: Port Serial Interface Spa Interface Specifications

    The 4-Port Serial Interface SPA provides up to four synchronous serial interfaces. Each port allows a maximum bandwidth of 8064 Kbps except for the X.21 and EIA/TIA-232 interfaces. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 30: Port Serial Interface Spa Cables, Connectors, And Pinouts

    10 feet (3 meters) Female CAB-SS-530MT EIA/TIA-530 DTE 10 feet (3 meters) Male CAB-SS-530AMT EIA/TIA-530A DTE 10 feet (3 meters) Male Figure 3-4 shows the Smart Serial cable connectors. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 31 Smart Serial Connector Pinouts Signal Signal O_TXD/RXD+ O_TXD/RXD- O_TXCE/RXC+ O_TXCE/RXC- B_TXC/TXC+ B_TXC/TXC- I_RXC/TXCE+ I_RXC/TXCE- I_RXD/TXD+ I_RXD/TXD- B_DCD/DCD+ B_DCD/DCD- O_DTR/DSR+ O_DTR/DSR- O_RTS/CTS+ MODE2 O_RTS/CTS- MODE1 I_CTS/RTS- MODE0 I_CTS/RTS+ MODEDCE Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 32: Port Channelized T1/E1 Serial Spa Overview

    Port is enabled by software, and there is a valid T1 or E1 signal without any alarms. Amber Port is enabled by software, and there is at least one alarm. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-10 OL-14126-03...

  • Page 33: Port Channelized T1/E1 Serial Spa Interface Specifications

    Table 3-9 RJ-45 Connector Pinouts Signal Description RX– Receive ring – Receive tip + No connection TX– Transmit ring – Transmit tip + No connection Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-11 OL-14126-03...

  • Page 34: Port Channelized Stm-1/Oc-3 Spa Overview

    Port is enabled by software, and there is at least one alarm. Port is not enabled by software. Green Port is enabled by software, and loopback is off. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-12 OL-14126-03...

  • Page 35: Port Channelized Stm-1/Oc-3 Spa Interface Specifications

    Use a multimode optical fiber that has a core or cladding diameter of 62.5/125 microns. Single-mode—155-Mbps, OC-3c/STM-1 optical fiber (SONET STS-3c or SDH STM-1) • Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-13 OL-14126-03...

  • Page 36: Port And 8-Port Fast Ethernet Spa Overview

    Figure 3-10. Figure 3-10 8-Port Fast Ethernet SPA Faceplate A/L (Active/Link) LED STATUS LED Table 3-11 describes the 4-Port and 8-Port Fast Ethernet SPA LEDs. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-14 OL-14126-03...

  • Page 37: Port And 8-Port Fast Ethernet Spa Cables, Connectors, And Pinouts

    (EMI) and susceptibility to common-mode sources. Wire pairs 4/5 and 7/8 are actively terminated in the RJ-45 port circuitry in the 4-Port and 8-Port Fast Ethernet SPA. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-15 OL-14126-03...

  • Page 38: Port 10-Gigabit Ethernet Spa Overview

    The 1-Port 10-Gigabit Ethernet SPA has two LEDs, an ACTIVE/LINK LED for the port and a STATUS LED, as shown in Figure 3-14. Figure 3-14 1-Port 10-Gigabit Ethernet SPA Faceplate SPA-1X10GE-L-V2 ACTIVE/LINK LED STATUS LED Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-16 OL-14126-03...

  • Page 39: Port 10-Gigabit Ethernet Spa Xfp Optical Transceiver Modules, Connectors, And Cables

    Single-mode very-long-reach (ZR) XFP module—XFP-10GZR-OC192LR • Cisco qualifies the optics that are approved for use with its SPAs. The above-listed small form-factor pluggable modules (XFPs) are the only optical transceiver modules qualified for use. Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter is approximately 10/125 microns) to connect your router to a network.

  • Page 40: Xfp Connections

    10GER IR-2: –4.7 to 4 dBm 10GZR LR-2: 0 to 4 dBm Receiver sensitivity (maximum) 10GLR SR-1: –12.6 dBm 10GER IR-2: –14.1 dBm 10GZR LR-2: –24 dBm Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-18 OL-14126-03...

  • Page 41: Xfp Port Cabling Specifications

    STATUS LED, as shown in Figure 3-17. Figure 3-17 2-Port Gigabit Ethernet SPA Faceplate SPA-2X1GE-V2 A/L (Active/Link) LED STATUS LED Table 3-16 describes the 2-Port Gigabit Ethernet SPA LEDs. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-19 OL-14126-03...

  • Page 42: Port Gigabit Ethernet Spa Cables, Connectors, And Pinouts

    Category 5 unshielded twisted pair (UTP) RJ-45 cables; these cables are available commercially. Figure 3-18 shows the RJ-45 connector. Table 3-17 lists the pinouts and signals for the RJ-45 connector. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-20 OL-14126-03...

  • Page 43: Port Gigabit Ethernet Spa Overview

    The 5-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port on the SPA, and one STATUS LED, as shown in Figure 3-19. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-21 OL-14126-03...

  • Page 44: Port Gigabit Ethernet Spa Connectors

    SFP module options, module specifications, and cabling specifications. For CWDM and DWDM SFP module specifications, see the “CWDM and DWDM SFP Modules for the Gigabit Ethernet SPAs” section on page 3-29. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-22 OL-14126-03...

  • Page 45: Port Gigabit Ethernet Spa Overview

    The small form-factor pluggable (SFP) module is an input/output (I/O) device that plugs into the Gigabit Ethernet ports on the 8-Port Gigabit Ethernet SPA, linking the port with a fiber-optic network. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-23...

  • Page 46: Port Gigabit Ethernet Spa Overview

    The 10-Port Gigabit Ethernet SPA has two types of LEDs: an A/L LED for each port on the SPA, and one STATUS LED, as shown in Figure 3-21. Figure 3-21 10-Port Gigabit Ethernet SPA Faceplate A/L (Active/Link) LED STATUS LED Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-24 OL-14126-03...

  • Page 47: Port Gigabit Ethernet Spa Connectors

    The following sections describe SFP module specifications and cabling information for the Gigabit Ethernet SPAs: SFP Module Specifications, page 3-26 • SFP Module Cabling and Connection Equipment, page 3-28 • Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-25 OL-14126-03...

  • Page 48: Sfp Module Specifications

    F (–5 to 85 SFP-GE-Z: 23 to 185 F (–5 to 85 SFP-GE-T: 23 to 185 F (–5 to 85 GLC-FE-100FX: 23 to 185 F (–5 to 85 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-26 OL-14126-03...
  • Page 49 1000BASE-ZX module at each end of the link whenever the fiber-optic cable span is equal to or greater than 15.5 miles (25 km) but less than 31 miles (50 km). Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-27...

  • Page 50: Sfp Module Cabling And Connection Equipment

    SFP module and the MMF cable on both the transmit end and the receive end of the link when link distances are greater than 984 ft (300 m). 3. Dispersion-shifted single-mode fiber-optic cable. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-28 OL-14126-03...

  • Page 51: Cwdm And Dwdm Sfp Modules For The Gigabit Ethernet Spas

    DWDM SFP Module Specifications Table 3-25 provides DWDM SFP module specifications. The DWDM SFP modules are only supported on the following SPAs: Note 2-Port Gigabit Ethernet SPA • Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-29 OL-14126-03...
  • Page 52 1000BASE-DWDM 1531.90 nm SFP module (100-GHz ITU grid) DWDM-SFP-3112= 1000BASE-DWDM 1531.12 nm SFP module (100-GHz ITU grid) DWDM-SFP-3033= 1000BASE-DWDM 1530.33 nm SFP module (100-GHz ITU grid) Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-30 OL-14126-03...

  • Page 53: Port And 4-Port Oc-3C/Stm-1 Pos Spa Overview

    Port is enabled by software, and there is a valid SONET signal without any alarms. Amber Port is enabled by software, and there is at least one alarm. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-31 OL-14126-03...

  • Page 54: Port And 4-Port Oc-3C/Stm-1 Pos Spa Interface Specifications

    SONET and SDH single-mode and multimode optical fiber connection (see Figure 3-23). Cisco qualifies the optics that are approved for use with its SPAs. The 2-Port and 4-Port OC-3c/STM-1 POS SPA supports the following types of optical transceiver modules: Multimode (MM) SFP module—SFP-OC3-MM •...
  • Page 55 Long-range SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between them. Figure 3-24 LC Type Cables Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-33 OL-14126-03...

  • Page 56: Oc-3 Module Connections

    OC-3 LR-2: –10 dBm Maximum receiver power damage OC-3 MM: 5 dBm OC-3 SR: 5 dBm OC-3 IR-1: 5 dBm OC-3 LR-1: 5 dBm OC-3 LR-2: 5 dBm Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-34 OL-14126-03...

  • Page 57: Port And 4-Port Oc-48C/Stm-16 Pos/Rpr Spa Overview

    Port is enabled by software, and there is at least one alarm. Amber Flashing Port is enabled by software, and there is a side mismatch. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-35 OL-14126-03...

  • Page 58: Port And 4-Port Oc-48C/Stm-16 Pos/Rpr Spa Interface Specifications

    For single-mode optical fiber connections, you can use either a duplex LC-type cable (see Figure 3-26) or two simplex LC-type cables, one for transmit (TX) and one for receive (RX). Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-36 OL-14126-03...

  • Page 59: Oc-48 Module Connections

    OC-48 SR: –3 dBm OC-48 IR-1: 0 dBm OC-48 LR-2: –9 dBm Maximum receiver power damage OC-48 SR: 5 dBm OC-48 IR-1: 5 dBm OC-48 LR-2: 5 dBm Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-37 OL-14126-03...

  • Page 60: Port Oc-12C/Stm-4 Pos Spa Overview

    Port is not enabled by software. Green Port is enabled by software, and loopback is off. Amber Port is enabled by software, and loopback is on. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-38 OL-14126-03...

  • Page 61: Port Oc-12C/Stm-4 Pos Spa Interface Specifications

    SONET and SDH single-mode and multimode optical fiber connection (see Figure 3-28). Cisco qualifies the optics that are approved for use with its SPAs. The 1-Port OC-12c/STM-4 POS SPA supports the following types of optical transceiver modules: Multimode (MM) SFP module—SFP-OC12-MM •...
  • Page 62 Long-range SFP optical transceiver modules (for long-reach configurations) cannot be connected back-to-back without using an attenuator between the two of them. Figure 3-29 LC Type Cables Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-40 OL-14126-03...

  • Page 63: Oc-12 Module Connections

    OC-12 LR-2: –8 dBm Maximum receiver power damage OC-12 MM: 5 dBm OC-12 SR: 5 dBm OC-12 IR-1: 5 dBm OC-12 LR-1: 5 dBm OC-12 LR-2: 5 dBm Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-41 OL-14126-03...
  • Page 64 Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers Shared Port Adapters 1-Port OC-12c/STM-4 POS SPA Overview Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-42 OL-14126-03...

  • Page 65: Required Tools And Equipment

    Antistatic container • Safety Guidelines This section provides safety guidelines that you should follow when working with any equipment that connects to electrical power or telephone wiring. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 66: Chapter 4 Preparing To Install A Sip Or A Shared Port Adapter

    à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 67 Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 68 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 69 Chapter 4 Preparing to Install a SIP or a Shared Port Adapter Safety Guidelines Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 70 ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the unit first. Statement 1026 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 71 Statement 1043 Warning The covers are an integral part of the safety design of the product. Do not operate the unit without the covers installed. Statement 1077 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 72: Electrical Equipment Guidelines

    Handle carriers by available handles or edges only; avoid touching the printed circuit boards or • connectors. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 73: Laser/Led Safety

    Class 1 LED product. Statement 1027 Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 74 Chapter 4 Preparing to Install a SIP or a Shared Port Adapter Laser/LED Safety Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 4-10 OL-14126-03...

  • Page 75: Handling Sips

    C H A P T E R Installing and Removing a SIP This chapter describes how to install or remove SIPs on the Cisco ASR 1000 Series Aggregation Services Routers. This chapter contains the following sections: Handling SIPs, page 5-1 •...

  • Page 76: Chapter 5 Installing And Removing A Sip

    Preparing for Online Removal of a SIP The Cisco ASR 1000 Series Routers support OIR of the SIP. To do this, you can power down a SIP (which automatically deactivates any installed SPAs) and remove the SIP with the SPAs still intact.

  • Page 77: Deactivating A Sip

    SIP in the Cisco ASR 1000 Series Router. For example, consider the case where you remove a SIP from the Cisco ASR 1000 Series Router to replace it with another SIP. You reinstall the same SPAs into the new SIP. When you enter the hw-module slot start command on the Cisco ASR 1000 Series Router, the SPAs automatically reactivate with the new SIP.

  • Page 78: Preparing For Online Removal Of A Spa

    The Cisco ASR 1000 Series Routers support OIR of a SPA independently of removing the SIP. This means that a SIP can remain installed in the Cisco ASR 1000 Series Router with one SPA remaining active, while you remove another SPA from one of the SIP subslots. If you are not planning to immediately replace a SPA into the SIP, then be sure to install a blank filler plate in the subslot.

  • Page 79: Deactivating A Spa

    Although graceful deactivation of a SPA is preferred using the hw-module subslot stop command in EXEC mode, the Cisco ASR 1000 Series Routers support removal of the SPA without deactivating it first. Before deactivating a SPA, ensure that the SIP is seated securely into the slot before pulling out the SPA itself.

  • Page 80: Reactivating A Spa

    SPA prior to removal when using the hw-module subslot command in global configuration mode. If the Cisco ASR 1000 Series Router is running, then the SPAs automatically start upon insertion into the SIP or with insertion of a SIP into the Cisco ASR 1000 Series Router.

  • Page 81: Verifying Deactivation And Activation Of A Spa

    EXEC configuration mode. Observe the Operational Status field associated with the SPA that you want to verify. In the following example, the SPA located in subslot 1 of the SIP in slot 2 of the Cisco ASR 1000 Series Router is administratively down from the hw-module subslot shutdown command:...

  • Page 82: Activation Of A Sip Configuration Example

    Deactivate a SPA when you want to perform OIR of that SPA. The following example deactivates the SPA (and its interfaces) that is installed in subslot 0 of the SIP located in slot 1 of the Cisco ASR 1000 Series Router and removes power to the SPA.
  • Page 83 Slide the SIP out of the router slot. If you are removing a blank filler plate, pull the blank filler plate Step 3 completely out of the router slot. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 84 Chapter 5 Installing and Removing a SIP SIP Installation and Removal Figure 5-2 illustrates how to install and remove a SIP in Cisco ASR 1000 Series Routers. Figure 5-2 SIP Installation and Removal -SI P10 AS R1 000 PWR STA...

  • Page 85: Handling Spas

    C H A P T E R Installing and Removing a Shared Port Adapter This chapter describes how to install or remove SPAs on the Cisco ASR 1000 Series Aggregation Services Routers. This chapter contains the following sections: Handling SPAs, page 6-1 •...

  • Page 86: C H A P T E R 6 Installing And Removing A Shared Port Adapter

    Preventing Electrostatic Discharge Damage, page 4-8 for information about ESD. Figure 6-2 illustrates how to install and remove a SPA in a SIP. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 87: Installing A Spa In A Sip

    If attached, remove any cables from the SPA. Step 1 To remove the SPA from the SIP, unfasten the captive installation screws on either side of the SPA. Step 2 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 88: Online Insertion And Removal

    Step 3 Online Insertion and Removal Cisco ASR 1000 Series Aggregation Services Routers SIPs and SPAs support online insertion and removal (OIR). SPAs can be inserted or removed independently from the SIP. OIR of a SIP with installed SPAs is also supported.

  • Page 89: Using Show Commands To Verify Sip And Spa Status

    Display information about the installed SIPs using the show diag command. Step 3 Use the show hw-module subslot all fpd command to verify the FPD version information of the SPAs Step 4 installed in the system. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 90: Using Show Commands To Display Spa Information

    SPAs. If you plan to install a new SPA in a subslot that is not in use, you must first remove the SPA blank filler plate. Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 91: Spa Cable-Management Brackets

    To remove the cable-management bracket, depress the button on the bracket and pull it out. Step 3 Blank filler plugs are provided if no cable-management brackets are installed. Note Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 92 Chapter 6 Installing and Removing a Shared Port Adapter SPA Cable-Management Brackets Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 93: Troubleshooting The Installation

    C H A P T E R Troubleshooting the Installation This chapter describes how to troubleshoot the installation of SIPs and SPAs on the Cisco ASR 1000 Series Aggregation Services Routers. This chapter contains the following sections: Troubleshooting, page 7-1 •...

  • Page 94: Using Debug Commands

    “Related Documentation” section on page viii. Using debug Commands The debug hw-module subslot command is intended for use by Cisco technical support personnel. For more information about the debug hw-module subslot command, see the Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide.

  • Page 95: Packing A Spa For Shipment

    “SPA Installation and Removal” section on page 6-2. Note The Cisco original packaging is to be used for the shipment of all SPAs and cable-management brackets. Caution Failure to properly use Cisco packaging can result in damage or loss of a product.
  • Page 96 Chapter 7 Troubleshooting the Installation Packing a SPA for Shipment Figure 7-1 Packing a SPA for Shipment Clamshell Cushion foam Exterior carton Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...

  • Page 97: C H A P T E R 7 Troubleshooting The Installation

    “SIP Installation and Removal” section on page 5-8. Note The Cisco original packaging is to be used for the shipment of all SIPs. Failure to properly use Cisco Caution packaging can result in damage or loss of a product. During this procedure, wear grounding wrist straps to avoid ESD damage to the card.
  • Page 98 Packing a SIP for Shipment Figure 7-2 Packing a SIP for Shipment Corrugated spacer Bottom support for inner carton Inner carton Foam packing cushions Exterior carton Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-03...
  • Page 99 3-32 addresses 2-Port and 4-Port OC-48c/STM-16 POS/RPR SPA for SPAs cables, optical transceiver modules, connectors 3-36 on SIPs interface specifications 3-36 LEDs 3-35 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide IN-1 OL-14126-03...
  • Page 100 5-6, 5-7, 5-8 bandwidth 3-31 cables 3-32, 3-33 connectors 3-32 faceplate (figure) 3-31 interface processor interface specifications 3-32 tools and parts required for installation LEDs 3-31 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide IN-2 OL-14126-03...

  • Page 101: Packing A Sip For Shipment

    RFC 2615, PPP over SONET/SDH install 3-32 physical specifications reactivating removal 5-2, 5-8 SPA compatibility (table) safety guidelines 1-2, 1-3 SFP (small form-factor pluggable) optics subslots Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide IN-3 OL-14126-03...
  • Page 102 CLI troubleshooting the installation using show commands to verify SIP and SPA status XFP-10GER-OC192IR 3-17 XFP-10GLR-OC192SR 3-17 XFP-10GZR-OC192LR 3-17 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide IN-4 OL-14126-03...

Table of Contents