Cisco Asr 1000 Series Aggregation Services Routers Sip And Spa Software Configuration Guide, Cisco Ios - Cisco ASR 1000 Series Software Configuration Manual

Configuring the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers
Example:
show version running
Step 12
Check whether the ROMMON version in WebEx SPA is up-to-date by using the show platform command. If it is not,
use the upgrade rommon all command to update the ROMMON version.
Step 13 Deploy the WebEx SPA package:
Example:
request platform software package install rp rp-slot-number file
bootflash:asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg
Here, rp-slot-number is active-rp-slot-number.
For a dual RP system, perform this additional step:
Example:
request platform software package install rp stby-rp-slot-number file
stby-bootflash: asr1000rp1-sipspawmak9.03.09.01.S.153-2.S1.pkg
Step 14 Verify that the SPA is active:
Example:
show platform
Step 15
Go to https://wma.webex.com
Step 16 Choose Administration > Node management.
Step 17
Select all the individual node names.
Step 18 Copy the wma-passcode string to all the nodes, for example, mtg_webex-web d2bc97983456676fbb7ea5cfcc2c3a57
Step 19 Enter the configuration mode:
Example:
configure terminal
Step 20 Enter the individual SPA interfaces, and re-enter the wma-passcodes:
Example:
interface service-Engine 0/0/0
ip address <ip addr> <subnet mask>
shutdown
service-engine ip address <ip addr> <subnet mask>
service-engine default-gateway <ip addr>
service-engine wma-passcode <wma-token>
service-engine nameserver <primary DNS nameserver> <secondary DNS nameserver>
service-engine hostname <spa name> <domainname>
service-engine wma-url <webex url for wma spa config>
no shutdown
show hw-module subslot <subslot> service-engine status
Repeat Step 19 for all the interfaces.
Step 21 Write configuration to memory:
OL-14127-17
and log in.
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Configuring the WebEx Node
Everest 16.5
379