Listing The Available Cisco Webex Spa Console Commands - Cisco ASR 1000 Series Software Configuration Manual

Troubleshooting the Cisco WebEx Node for the ASR 1000 Series Aggregation Services Routers

Listing the Available Cisco WebEx SPA Console Commands

The Cisco WebEx SPA console supports a similar help function as the RP console. You can enter ? at the
console to obtain a list of the available commands as shown in the following example:
service-spa# ?
Exec commands:
clean
copy
delete
dir
exit
format
fsck
less
load
mkdir
move
ping
rmdir
show
terminal
traceroute
webex
Some of the most useful commands include:
• show eventlog—Dumps the content of the /var/log/messages file.
• show disk partitions—Displays the partitions available on the hard disk drive (HDD).
• show disk smart—Displays S.M.A.R.T. output of the HDD.
• show tech-support—Gathers information for troubleshooting.
• ping—Sends echo messages.
• copy tftp: disk0:—Copies files from a TFTP server to the HDD first partition.
• load—Loads a plug-in image.
• exit—Exits from the Cisco WebEx Node SPA console.
Exiting the Cisco WebEx Node SPA Console
To exit the SPA console, use the exit command as shown in the following example:
service-spa# exit
Router#
Handling TraceBack and Core Dump Files on the Cisco WebEx Node SPA
This section describes how to gather traceback and core dump file information for troubleshooting by Cisco
technical support.
OL-14127-17
Clean commands
Copy files from src to destination
Remove files
Directory listing for files
Exit from the EXEC
Format a device with ext3/fat16/dummy file system
Perform file system check operation
Shows content of file
Load plug-in image
Create new directory
Move files
Send echo messages
Remove existing directory
Show system information
Set terminal line parameters
Trace route to destination
Webex Application Commands
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Handling TraceBack and Core Dump Files on the Cisco WebEx Node SPA
Everest 16.5
385